Abstract:Coal-fired industrial boilers should operate across a wide range of loads and with a higher reduction of pollutant emission in China. In order to achieve these tasks, a physical model including two swirling burners on the front wall and boiler furnace was established for a 35 t/h pulverized coal-fired boiler. Based on Computational Fluid Dynamics (CFD) theory and the commercial software ANSYS Fluent, mathematical modeling was used to simulate the flow and combustion processes under 75% and 60% load operating conditions. The combustion characteristics in the furnace were obtained. The flue gas temperature simulation results were in good agreement with experimental data. The simulation results showed that there was a critical distance L along the direction of the furnace depth (x) and Hc along the direction of the furnace height (y) on the burner axis. When x < L, the concentration of NO decreased sharply as the height increased. When y < Hc, the NO concentration decreased sharply with an increase in the y coordinate, while increasing dramatically with an area-weighted average gas temperature increase in the swirl combustion zone. This study provides a basis for optimizing the operation of nitrogen-reducing combustion and the improvement of burner structures.

Numerical Simulation for Cold Blast Distribution Feature of Grid-type Burner of Hot Air Furnace

OXYGEN-ENRICHED COMBUSTION IN A HORIZONTAL FURNACE AND THREE- DIMENTIONAL NUMERICAL SIMULATION TEST THEREOF

Simulation of temperature field of sintering ignition furnace

Numerical Simulation of Combustion in 35 t/h Industrial Pulverized Coal Furnace with Burners Arranged on Front Wall

Numerical Simulation on the Rich/Lean Pulverized Coal Burner

Numerical Simulation of the Flow and Combustion Processes in a Three-Dimensional, W-Shaped Boiler Furnace

Numerical Simulation Of The Combustion Processes In A W-Shaped Boiler Furnace Under Different Operating Conditions

Numerical simulation of combustion distribution in a gas burner

NUMERICAL SIMULATION ON TURBULENT FLOW AND HEAT TRANSFER OF VERTICAL PIPE IN QUENCH CHAMBER OF COAL GASIFIER

Numerical Simulation for Pulverized Coal Gasifier's Fluid Flow Characteristic on Cold and Hot Condition

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace

Numerical Simulating for the Swirling Jet Two-Phase Flow from Pulverized Coal Rich/Lean Burner

Numerical Investigation of Different Burner Arrangement on A Coal-Fired Boiler

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet

NUMERICAL MODELING OF 3-D ISOTHERMAL FLOW IN TANGENTIALLY-FIRED BOILER WITH BODY-FITTED MESHES

Numerical Simulation Research of Low Calorific Value Gas Combustion Process

Three-dimensional numerical simulation of gas combustion in an industrial glass furnace

Numerical Simulation on Combustion of Ble nded Coal in the Burning Region of Revolving Cement Kiln

Numerical simulation of the two-phase flow and combustion in the tangential-firing boiler furnace by using the ALE algorithm and trajectory model

Numerical Simulation for Gas-solid Two-phase Flow in New Type Rich-lean Steady Burner

One-dimensional Mathematical Model and Relevant Simulation for Pulverized Coal Combustion in a Boiler Furnace