Abstract:Employing HNO3, NH3· H2O, NH4NO3, H2C2O4 and commercial available Y2O3 as starting materials, and using SDBS as surfactant and PEG 2000 as assistant , the precursor Y ( NH4 ) ( C2 O4 ) 2· H2 O and its final products Y 2 O3 powders were successfully fabricated by the improved oxalate precipitation method and subsequent calcination treatment .In this specific route , a little amount of designed Y(NO3)3 solution was added into a certain huge volume of NH 3· H2O-NH4NO3 mixed solution to create Y(OH)3 hydro-gel, so the pH value could be precisely controlled during the process .Then the precursor precipitate was produced by dropping the saturated oxalate acid solution into the obtained white colloidal at 85 ℃.At last, following heat treatment at 950 ℃ for 2 h, the final product Y2 O3 powders were obtained .X-ray powder diffraction ( XRD) and scanning electron microscopy ( SEM) results revealed that the pre-cursor Y(NH4)(C2O4)2· H2O in forms of cubic crystal aggregations was obtained .Despite substantial removal of oxide, carbon and hydrogen ions , the precursor calcined Y 2 O3 particles maintained well morphology properties of the precursor even after calcination at 950 ℃for 2 h.Further, to understand the factors influencing the size and morphology of the final Y 2 O3 particles, experiments were carried out by mainly changing the mass ratio of SDBS/PEG2000 and the pH value in the oxalate acid precipitation process .It was ob-served from the SEM results that the size and shape of the synthesized Y 2 O3 particles could be controlled by precisely adjusting reaction conditions, especially the pH value in the oxalate acid precipitation process .Y2 O3 particles with diameter under 1μm could be made when the pH value in the oxalate acid precipitation process was reduced to 1.8.In addition, based on the thermogravimetric (TG) and differential scanning calorimetry ( DSC) analysis, the thermal decomposition mechanism of precursor was proposed as follows: Y (NH4)(C2O4)2· H2O→Y(NH4)(C2O4)2→Y2O2CO3→Y2O3.

Size-and Shape-Controlled Synthesis and Formation Mechanism of Y(NH4)(C2O4)2·H2O and Y2O3 Phases

Study on Preparation of Yttrium Oxide with Large Particle Sizes and Spherical Shapes by Precipitation with Ammonium Bicarbonate

Preparation of nano-sized Y_2O_3 by ammonium oxalate precipitation method

Controlling the Morphology of Yttrium Oxide Through Different Precursors Synthesized by Hydrothermal Method

Preparation of ultra-fine yttrium oxide by ultrasonic-quenching-homogeneous precipitation method

Synthesis, characterization and formation mechanism of dumbbell-like YOHCO3 and rod-like Y2(CO3)3·2.5H2O

Synthesis of Yttrium Oxide Nanocrystal Via Solvothermal Process

Influence of Ph on the Morphology of Yttrium Oxide Hydroxide Nitrate Nanocrystal

Synthesis and characterization of complicated copper oxalate precursor powder by complexing precipitation method

Shape-controlled Synthesis of Novel Precursor for Preparing Fiber-like Nickel Oxide Powders

Y(OH)3 and Y2O3 with Novel Structures: Formation and Mechanism

Preparation of Highly Crystallized Yttrium Oxysulfide Suspension Via a Novel Colloidal Processing.

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

Synthesis of Y2O3 nanopowders and transparent Y2O3 ceramics by carbonate-precipitation process

Orthogonal Experimental Optimization for Preparation Ofyag Nano-Powders by Co-Precipitation Method

Yttrium Oxide (Y2O3) Nanoparticle Crystallization in Gas-Phase Synthesis: A Molecular Dynamics Study

Influence of Sulfate Ion on Phase and Dispersion of Y<sub>3</sub>Al<sub>5</sub>O<sub>12</sub> Nanopowders with the Co-Crystallization Method

Preparations of Pure Alkaline Earth Molybdate Phases from Single Molecular Precursors

Preparation and Synthesis Mechanism of Ytterbium Monosilicate Nano-Powders by a Cocurrent Coprecipitation Method

Preparation and Characterization of ZrO<sub>2</sub> Nanopowders for Solid Oxide Fuel Cells

Controllable Synthesis of Zno with Various Morphologies by Hydrothermal Method