Abstract:Due to their unique advantages of high strength, high performance, and light weight, ultra-thin-walled (UTW) tubes have attracted increasing application in the aviation and aerospace industries. However, wrinkling, cracking, cross-section distortion, and even collapse easily occur in UTW tube bending process. In this study, a new mandrel design method with variation in the mandrel ball thickness for bending UTW tubes was proposed to improve the forming quality. First, a basic mandrel design scheme with a uniform mandrel ball thickness was determined according to engineering experiences and preliminary research. Then, three different mandrel ball thicknesses were determined based on the same mandrel support angle of the basic scheme (BS), and combination schemes (CSs) of mandrel balls with different thicknesses were designed. A 3D elastic–plastic finite element (FE) model of the numerical control (NC) bending process of UTW tubes was established and verified, and the influence of different combinations of mandrel ball thickness variation on the bending quality of UTW tubes was investigated. The results showed that compared with the BS, the CSs can effectively improve the von Mises stress distribution and wall thickness uniformity on the extrados, and significantly reduce the wall-thinning ratio, wall-thickening ratios, and ovality of the UTW bent tube. The combination scheme with as many thin mandrel balls as possible at the beginning of the bending and thick mandrel balls at the end of the support was beneficial to reduce the wall-thinning ratio. Increasing the number of medium or thick mandrel balls in combination scheme can increase the mandrel support angle and reduce the ovality of the UTW bent tubes. These results are of great significance for guiding the design of mandrels and improving the forming quality of UTW tubes.

Range of process parameters of thin-walled tube NC bending

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

Parameters Optimization of Tailor Welded Blank Forming Process

Genetic Algorithm-Based Optimization of the Thin-Walled Tube of High Strength Aluminum Alloy in Diamond Turning Process

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

Bending Process Parameters Optimization of the 316L Tube with Small R/D Ratio: A Physical Prior Knowledge Based Bayesian Optimization Approach

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Cross-sectional Performance Prediction of Metal Tubes Bending with Tangential Variable Boosting Based on Parameters-Weight-adaptive CNN.

Influence of process parameters on the flow forming quality of thin-walled tube with large diameter-thickness ratio

Process parameters optimization of differential heating push-bending for small bending radius tube based on orthogonal experiments

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

A new mandrel design with mandrel ball thickness variation for the bending process of aviation ultra-thin-walled tubes

Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Reinforced Quantum-Behaved Particle Swarm-Optimized Neural Network for Cross-Sectional Distortion Prediction of Novel Variable-Diameter-die-formed Metal Bent Tubes.

Investigation on the influence of mandrel on the forming quality of thin-walled tube during free bending process

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Uncertainty analysis and robust design optimization for the heat-assisted bending of high-strength titanium tube