Abstract:Warm rotary draw bending provides a feasible method to form the large-diameter thin-walled (LDTW) TC4 bent tubes, which are widely used in the pneumatic system of aircrafts. An accurate prediction of flow behavior of TC4 tubes considering the couple effects of temperature, strain rate and strain is critical for understanding the deformation behavior of metals and optimizing the processing parameters in warm rotary draw bending of TC4 tubes. In this study, isothermal compression tests of TC4 tube alloy were performed from 573 to 873 K with an interval of 100 K and strain rates of 0.001, 0.010 and 0.100 s−1. The prediction of flow behavior was done using two constitutive models, namely modified Arrhenius model and artificial neural network (ANN) model. The predictions of these constitutive models were compared using statistical measures like correlation coefficient (R), average absolute relative error (AARE) and its variation with the deformation parameters (temperature, strain rate and strain). Analysis of statistical measures reveals that the two models show high predicted accuracy in terms of R and AARE. Comparatively speaking, the ANN model presents higher predicted accuracy than the modified Arrhenius model. In addition, the predicted accuracy of ANN model presents high stability at the whole deformation parameter ranges, whereas the predictability of the modified Arrhenius model has some fluctuation at different deformation conditions. It presents higher predicted accuracy at temperatures of 573–773 K, strain rates of 0.010–0.100 s−1 and strain of 0.04–0.32, while low accuracy at temperature of 873 K, strain rates of 0.001 s−1 and strain of 0.36–0.48. Thus, the application of modified Arrhenius model is limited by its relatively low predicted accuracy at some deformation conditions, while the ANN model presents very high predicted accuracy at all deformation conditions, which can be used to study the compression behavior of TC4 tube at the temperature range of 573–873 K and the strain rate of 0.001–0.100 s−1. It can provide guideline for the design of processing parameters in warm rotary draw bending of LDTW TC4 tubes.

Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Prediction of NC tube bending process parameters based on artificial neural network

A Study on Plastic Wrinkling in Thin-Walled Tube Bending Via an Energy-Based Wrinkling Prediction Model

Predicting the wrinkling in AA5052 seamless tubes manufactured by free bending forming technology

Modelling of Wrinkling in NC Bending of Thin-walled Tubes with Large Diameters under Multi-die Constraints Using Hybrid Method

Artificial Neural Networks (ANN) Based Compressive Strength Prediction of AFRP Strengthened Steel Tube

A New Method to Accurately Obtain Wrinkling Limit Diagram in Nc Bending Process of Thin-Walled Tube with Large Diameter under Different Loading Paths

Wrinkling Analysis for Forming Limit of Tube Bending Processes

A Hierarchical Prediction Method Based on Hybrid-Kernel GWO-SVM for Metal Tube Bending Wrinkling Detection

A Multi-State Fusion Informer Integrating Transfer Learning for Metal Tube Bending Early Wrinkling Prediction

Influence of Thick Plate Bending Process on Material Strength Distribution in Hydrogenation Reactor Shells

3D Numerical Study on Wrinkling Characteristics in NC Bending of Aluminum Alloy Thin-Walled Tubes with Large Diameters under Multi-Die Constraints

Explicit Fe Wrinkling Simulation and Method to Catch Critical Bifurcation Point in Tube Bending Process

Springback optimization for CNC tube bending machine based on an artificial neural networks (ANNs)

An Imperfection-Based Perturbation Method for Plastic Wrinkling Prediction in Tube Bending under Multi-Die Constraints

Smart Control of Springback in Stretch Bending of a Rectangular Tube by an Artificial Neural Network

Constitutive modeling of compression behavior of TC4 tube based on modified Arrhenius and artificial neural network models

Effect of Clearance on Wrinkling of Thin-Walled Rectangular Tube in Rotary Draw Bending Process

The Interactive Effects of Wrinkling and Other Defects in Thin-Walled Tube NC Bending Process

Influences of Forming Parameters on Wrinkling in NC Thin-walled Tube Bending