Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. High strength AA2219-T8, Al-Cu alloy of 18 mm plate is welding by friction stir welding (FSW) technology and used for heavy-lift launch vehicles tank. During FSW thick AA2219-T8 plate, joint tensile strength and microhardness are affected by multiple interconnected variables including welding force, temperature, and geometric quantity of the butt face. The joint mechanical properties are difficult to predict and ensure. This paper proposed a hybrid predicting approach based on multi-source information fusion, called Down-Sampling and One-Dimensional Convolutional Neural Network (DS-1DCNN). Initially, FSW experiments were conducted to collect the axial force, welding surface temperature at advancing and retreating side, gap, and mismatch signals, which were fused through DS technology. To extract temporal information and features from signals, a 1DCNN prediction model was established, with the fused multi-source signals as input and the tensile strength and Vickers hardness as output. Subsequently, the optimal model architecture and hyper-parameters of 1DCNN were determined through experiments and grid search combined with K-fold cross-validation, and an online prediction system was developed. Finally, effective validation experiments were conducted and the experimental results agreed with the DS-1DCNN prediction results with an acceptable error of approximately 5%. Parameter sensitivity analysis revealed that the number of convolutional layers and learning rate were identified as critical parameters affecting the model performance. Additionally, time analysis showed that the calculation time of the prediction system was less than 200 ms which can meet the time requirements of real-time thick-plate FSW application. The research lays a foundation on the real-time quality monitoring in the process of FSW thick-plate butt joint.

Prediction of load–displacement curves of flow drill screw and RIVTAC joints between dissimilar materials using artificial neural networks

Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network

Prediction and Compensation of Force-Induced Deformation for a Dual-Machine-based Riveting System Using FEM and Neural Network

Quality prediction and rivet/die selection for SPR joints with artificial neural network and genetic algorithm

Failure Pressure Prediction of a Corroded Pipeline with Longitudinally Interacting Corrosion Defects Subjected to Combined Loadings Using FEM and ANN

Predicting High Temperature Flow Stress of Nickel Alloy A230 Based on an Artificial Neural Network

On the generalization capability of artificial neural networks used to estimate fretting fatigue life

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys

Failure Pressure Prediction of High Toughness Pipeline with a Single Corrosion Defect Subjected to Combined Loadings Using Artificial Neural Network (ANN)

Artificial neural network approach for prediction of stress–strain curve of near β titanium alloy

Strength prediction and progressive damage analysis of carbon fiber reinforced polymer-laminate with circular holes by an efficient Artificial Neural Network

Online prediction of joint mechanical properties of FSW thick AA2219-T8 based on multi-source information fusion using 1DCNN

Artificial neural network in prediction of mixed-mode I/II fracture load

An Empirical Equation for Failure Pressure Prediction of High Toughness Pipeline with Interacting Corrosion Defects Subjected to Combined Loadings Based on Artificial Neural Network

Comparative Study of Neural Network–Based Models for Fatigue Crack Growth Predictions of Short Cracks

A micromechanics-based artificial neural networks model for rapid prediction of mechanical response in short fiber reinforced rubber composites

Prediction of the Axial Bearing Compressive Capacities of CFST Columns Based on Machine Learning Methods