Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

Cross-sectional Performance Prediction of Metal Tubes Bending with Tangential Variable Boosting Based on Parameters-Weight-adaptive CNN.

Machine Learning-Based Probabilistic Predictions for Concrete Filled Steel Tube (CFST) Column Axial Capacity

Heuristic Evaluation for Progressive Additive Manufacturing of Industrial Bending Tubes Based on Reconfigurable Transfer Learning

Reinforced Quantum-Behaved Particle Swarm-Optimized Neural Network for Cross-Sectional Distortion Prediction of Novel Variable-Diameter-die-formed Metal Bent Tubes.

Bo-LSTM based cross-sectional profile sequence progressive prediction method for metal tube rotate draw bending

A Hierarchical Prediction Method Based on Hybrid-Kernel GWO-SVM for Metal Tube Bending Wrinkling Detection

Digital-twin-enhanced metal tube bending forming real-time prediction method based on multi-source-input MTL

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

A three-directional stress-strain model-based physics-embedded prediction framework for metal tube full-bent cross-sectional characteristics

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Springback angle prediction of circular metal tube considering the interference of cross-sectional distortion in mandrel-less rotary draw bending

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

A Multi-State Fusion Informer Integrating Transfer Learning for Metal Tube Bending Early Wrinkling Prediction

Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method

Physics-informed Springback Prediction of 3D Aircraft Tubes with Six-Axis Free-Bending Manufacturing

Toward Axial Accuracy Prediction and Optimization of Metal Tube Bending Forming: A Novel GRU-integrated Pb-NSGA-III Optimization Framework

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Digital-Twin virtual model real-time construction via spatio-temporal cascade reconstruction for full-field plastic deformation monitoring in metal tube bending manufacturing

Mechanical Properties Prediction for Hot Rolled Alloy Steel Using Convolutional Neural Network.

High-cycle fatigue S-N curve prediction of steels based on a transfer learning-guided convolutional neural network

Prediction of Mechanical Properties of Steel Tubes Using a Machine Learning Approach