Abstract:Mathematical physics equations are often utilized to describe physical phenomena in various fields of science and engineering. One such equation is the Fourier equation, which is a commonly used and effective method for evaluating the effectiveness of temperature control measures for mass concrete. One important measure for temperature control in mass concrete is the use of cooling water pipes. However, the mismatch of grids between large-scale concrete models and small-scale cooling pipe models can result in a significant waste of calculation time when using the finite element method. Moreover, the temperature of the water in the cooling pipe needs to be iteratively calculated during the thermal transfer process. The substructure method can effectively solve this problem, and it has been validated by scholars. The Abaqus/Python secondary development technology provides engineers with enough flexibility to combine the substructure method with an iteration algorithm, which enables the creation of a parametric modeling calculation for cooling water pipes. This paper proposes such a method, which involves iterating the water pipe boundary and establishing the water pipe unit substructure to numerically simulate the concrete temperature field that contains a cooling water pipe. To verify the feasibility and accuracy of the proposed method, two classic numerical examples were analyzed. The results showed that this method has good applicability in cooling pipe calculations. When the value of the iteration parameter α is 0.4, the boundary temperature of the cooling water pipes can meet the accuracy requirements after 4~5 iterations, effectively improving the computational efficiency. Overall, this approach provides a useful tool for engineers to analyze the temperature control measures accurately and efficiently for mass concrete, such as cooling water pipes, using Abaqus/Python secondary development.

Application of Abaqus secondary development to the simulation of intermediate frequency hot pipe-bending

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

Application of ABAQUS secondary development in finite element analysis of concrete-filled steel tubular structures

Calculation of Mass Concrete Temperature Containing Cooling Water Pipe Based on Substructure and Iteration Algorithm

Using Abaqus User Subroutines to Develop a New Finite Element Modeling Tool for Heat Treatment Simulation

Modelling and Finite Element Simulation for Fdsc Multi-Point Forming Based on Abaqus

Coupling Computational Approach of Secondary Flow and Heat Transfer in Aero-engine Hot Components

Temperature Simulation of Aluminium Alloy Double-Arc Welding Process on Simplified Conditions

Study on the Phase Transformation Simulation of Hot-Stamping

Coupled numerical simulation of flow field, temperature field, microstructure field and stress field on heat treatment process

Application of Python-Based Abaqus Secondary Development in Laser Shock Forming of Aluminum Alloy 6082-T6

Numerical simulation of thermal and residual stress fields induced by lined pipe welding

A customized system for simulation of welding thermal process

Welding Numerical Simulation Analysis of AP 1000 Insert Plate and Penetration Sleeves Based on ABAQUS

Abaqus2Matlab: A suitable tool for finite element post-processing

Secondary Development Software of LS-DYNA for the Numerical Simulation of Multi-point Forming

The Software for Prediction and Simulation of Surface Heat Transfer Coefficients of Secondary Cooling Area for Continuous Casting Slab

Numerical Simulation of Hot Bending with Ultra High Strength Boron Steel

Numerical Studies on Double Wire Submerged Arc Welding Residual Stress of X80 Steel Spiral Pipe

The coupled thermo-mechanical-microstructural finite element modeling of hot stamping process in 22MnB5 steel

Development of Finite Element Program of Three Dimensional Thermal-Elastic-Plastic Analysis and Its Application to Assembly of a Compressor by Welding.