Abstract:In order to solve the folded problem in multi-point forming with symmetric punches (SMPF), a new process of multi-point forming with asymmetric punches (AMPF) is proposed in this paper. Experiment and numerical simulation were both used to elaborately analyze the problem of fold. The deformation behaviors of cylindrical surface, spherical surface, and sail surface in two processes were investigated. The characteristics of shape precision of the sheet metal were obtained under different forming parameters. Then, the stress and strain distribution of the cylindrical surface is obtained by numerical simulations. Finally, the mechanisms of folded generation and suppression were revealed by process analysis. It is shown that the surface quality and the forming precision of the workpiece formed by AMPF are improved by AMPF. Besides, the stress fluctuation during the forming process is obviously reduced and the uniformity of stress and strain after forming is enhanced. In addition, under the same loading condition, the average shape error of the cylindrical surface decreases by 17.6%, the stress extremum difference decreases by 5.7%, and the strain extremum difference decreases by 4.3%. The above research indicates that AMPF has a good application prospect in sheet metal forming.

Modelling and Finite Element Simulation for Fdsc Multi-Point Forming Based on Abaqus

Finite Element Simulation Of Multi-Point Forming (Mpf) Based On Abaqus

FEM Simulation of Metal Drawing Parts Forming Based on the ABAQUS Software

3D FEM system for analysis of industrial metal forming processes

3 D FEM Simulation of the Cross-Shaft Multi-Stage Forging Processes

Design of the Parametric Simulation Program for Multi-Point Forming Based on APDL

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method

Development and application of sheet-forming simulation

Finite Element Simulation of Two Stroke Deep Drawing in Sheet Metal Forming

Study on finite element parametric modeling of multi-point forming

MULTI-STEP NUMERICAL SIMULATION OF BULK METAL FORMING PROCESSES BASED ON DEFOR MATIoN THEORY OF PLASTICITY

The Simulation of Roll Forming with Multiple Passes

Numerical Simulation Of The Thickness Influence On The Crease And Springback For Sphere Fdsc Mpf

Research on Parametric Simulation Based on Pro/E for Sheet Metal Stamping

FEM Simulation of Main Deformation During Cage Roll-Forming Process

Deformation Behavior of Curved Shells in Multi-Point Forming with Asymmetric Punches

3D‐FE Modelling and Simulation of Multi‐way Loading Process for Multi‐ported Valves

A Finite Element Model Using Multi-Layered Shell Element in Laser Forming

Numerical Modeling and Deformation Analysis for Electromagnetically Assisted Deep Drawing of AA5052 Sheet

Application of ABAQUS secondary development in finite element analysis of concrete-filled steel tubular structures