Abstract:Spray cooling is a key technology in the continuous casting process and has a marked influence on the product quality. In order to obtain the heat transfer characteristics, which are closer to the actual continuous casting to serve the design, prediction and simulation, we created an experimental laboratory setup to investigate heat transfer characteristics of air mist spray cooling during the continuous casting secondary cooling process. A 200-mm thick sample of carbon steel was heated above 1000 degrees C, and then cooled in a water flux range of 0.84 to 3.0 L/(m(2).s). Determination of the boundary conditions involved experimental work comprising an evaluation of the thermal history and the heat flux and heat transfer coefficient (HTC) at the casting surface using inverse heat conduction numerical schemes. The results show that the heat fluxes were characterized via boiling curves that were functions of the slab surface temperatures. The heat flux was determined to be 2.9 x 10(5) W/m(2) in the range of 1100 to 800 degrees C with a water flux of 2.1 L/(m(2).s). The critical heat flux increased with the increase of water flux. The HTC was close to a linear function of water flux. We also obtained the relation between the HTC and the water flux in the transition boiling region for surface temperatures of 850 to 950 degrees C.

The Software for Prediction and Simulation of Surface Heat Transfer Coefficients of Secondary Cooling Area for Continuous Casting Slab

Prediction method of surface heat transfer coefficients of secondary cooling area for continuous casting slab

Application of Process Simulation Software on Secondary Cooling Optimization for Continuous Caster

Emulation of Dynamic Secondary Cooling and Soft Reduction in Continuous Slab Casting

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

An Optimization Control Method for Heat Transfer Model during Slab Continuous Casting

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Real-time simulation of heat transfer in continuous casting

Research on dynamic secondary cooling control model for slab continuous casting machine with high casting speed

Optimization and Control of Secondary Cooling Parameters of Continuous Casting

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Dynamic Secondary Cooling of Continiuous Slab Casting by Incremental PID Control

Secondary Cooling Control of Continuous Casting Process with Model Strategy

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Secondary Cooling Design for Slab Caster Based on Transient Heat Transfer Module

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

连铸板坯动态二冷控制系统开发与应用 Development and Application of Dynamic Secondary Cooling Control System on Continuous Casting Slab

Computational modeling and control system of continuous casting process

Application and development of numerical simulation technology in Casting

PREDICTION OF SURFACE HEAT FLUX IN A WATER JET COOLING PROCESS