Influences Of Shock Wave Transient Transmission On Laser Peened Residual Stress Fields

Su Bo-Yong,Sun Gui-Fang,Pei Xu,Zhu Ran,Ni Zhong-Hua

DOI: https://doi.org/10.11933/j.issn.1007-9289.20170927001

2018-01-01

China surface engineering

Abstract:Taking TC4 Titanium alloy as the object, the effect of high strain rate on the velocity of plastic shock wave was analyzed based on the Johnson-Cook constitutive model. First, the transient transmission of shock wave with different laser shock peening parameters was investigated through three-dimensional finite element method. Second, the mechanism of saturation phenomenon with multiple laser peening was analyzed. Finally, the method of obtain uniform surface residual stress was obtained. Results show that the plastic shock wave velocity during laser peening process is significantly affected by high strain rate effects. Furthermore, the plastic shock wave velocity is inversely proportional to the plastic strain. In the initial stage, the plastic strain increases, and plastic shock wave velocity decreases with increasing laser power density, and thus attenuation gradient of shock wave pressure increases. When the power density keeps constant, the plastic strain and attenuation gradient of laser shock wave decreases with increasing laser peening times, and the residual compressive stress induced by laser shock peening increases. When the impact times increase up to 3 or 4, the attenuation rate is similar and the residual compressive stress will not increase, indicating that the effects of laser shock peening reach saturation. The uniform surface residual stress field can be obtained with the saturation effects when overlapping rate during laser peening process is more than 50%.