Abstract:The tribological behavior of Mo-sprayed piston r ing sliding against grey cast iron cylinder liner under the lubrication of a ful ly formulated petroleum based engine oil SJ/5W-30 containing molybdenum dithioc arbomate (MoDTC) or molybdenum dithiophosphate (MoDTP) was investigated with an Optimol-SRV test rig. The testing temperatures were controlled at 125 ℃ and 32 0 ℃ to simulate the real engine operating conditions.The worn surfaces of the p iston ring and cylinder liner were observed and analyzed by means of scanning el ectron microscopy (SEM) and X-ray photoelectron spectroscopy(XPS). It was obser ved that the frictional behavior of both MoDTC and MoDTP depends heavily on the experimental temperature; MoDTC is effective in decreasing the friction coeffici ent and wear rate at a relatively extended test duration while MoDTP shows frict ion-reduction ability only at relatively high temperatures. It can be seen from the SEM observations of the worn piston ring and cylinder liner surfaces that t he set test temperature range has also strong impact on both the wear severity a nd the wear mechanisms in the contact surface. When it rises from 125 ℃ to 320 ℃, the wear becomes more serious, and the wear mechanism changes from abrasion to adhension. In addition, the chemical interaction between the lubricant conta ining organo-molybdenum and the tribocontact surfaces plays a crucial role in f riction reducing or antiwear film formation, which is dependent on the tribochem ical characteristics of the active ferrous materials and the applied friction mo difiers such as MoDTC or MoDTP. XPS analysis of the worn cylinder liner surfaces indicates that the resultant tribochemical films are mainly composed of iron ox ides, molybdenum oxide, iron sulfide, molybdenum disulfide, and zinc and iron ph osphates. The proportion of these species is a function of both the specific fri ction modifiers used and the experimental temperature. It is supposed that the b etter friction-reduction and wear-resistant actions of MoDTC at 125 ℃ is attr ibuted to the higher content of MoS2 and other wear-resistant compounds gener ated on the worn cylinder liner surfaces.

Influence Of Surface Texture Distribution Position On Tribological Characteristics Of Feni Plated Cylinder Liner With A Composite Lubrication Structure

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Effects of different surface textures on tribological performances of the cylinder liner-piston ring: An experimental study

Effect of spherical crown texturing and ionized sulfur infiltration on the tribological performance of piston-cylinder liner

Influence of Different Surface Texture Parameters on the Contact Performance of Piston Ring-Sleeve Friction Pair of Hydraulic Cylinders

Lubrication Adaptability to the Variations of Combustion Modes by Texturing Cylinder Liner in Engines

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Effect of MoDTC and MoDTP on Tribological Behavior of Cylinder Liner/Piston Ring

Influence of Macro-Scale Cylinder Liner Partial Surface Texturing on the Tribological Behavior of Two-Stroke Marine Diesel Engine Piston Ring

Tribological Performance of Surface Treated Piston Assembly with Infiltrated Layer

Adaptability of Laser Textured Liner to the Effects of Methanol Diluting Oil on Tribological Properties

Experimental Study on Texture Coupling Mechanism and Antifriction Performance of Piston Rod Seal Pair

Reciprocating sliding friction behavior and wear state transition mechanism of cylinder liner and piston ring

An experimental study on tribological properties and air tightness of co-textured cylinder liner-piston ring on an engine tester

The friction of surface textured cylinder liner segments modified by Direct Laser Writing and Direct Laser Interference Patterning processes

Influence of Synergistic Effect of Cu Particles and Striated Surface Texture on Tribological Properties

Synergistic Effect of Elliptic Textures and H-DLC Coatings for Enhancing the Tribological Performance of CuAl10Fe5Ni5 Valve Plate Surfaces

Tribological Performance of Three Advanced Piston Rings in the Presence of MoDTC-modified GF-3 Oils

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions