Abstract:The diamond-like carbon (DLC) coating prepared using filtered cathodic arc deposition (FCVA) lost its promising wear resistance under high temperatures. Element-doped DLC coatings have been investigated to suppress carbon oxidation reaction and subsequently enhance the wear resistance in high-temperature environments. Previous research clarified the excellent tribological properties of boron-doped DLC (B-DLC) but identified challenge such as arc discharge extinguishment and coating declamation (under high-temperature friction test). In this study, the introduction of Argon gas (10 sccm) during the deposition process stabilized stable arc discharge, resulting in high hardness and deposition rate. Moreover, a chromium interlayer and varying concentration of Cr dopant (0.5 %, 1.0 %, 3.0 % at.) were added to B-DLC to develop a stable, co-doped DLC with low friction and high wear resistance. Raman spectroscopy and nano-indentation revealed an increase in the disordered carbon structure and reduction in hardness and Young's Modulus with Cr doping. Macroscopic ball-on-disk friction test, showed 1 % Cr-doped B-DLC (a-C:B:Cr 1 ) coating exhibited super low friction (avg. coefficient 0.02) and a low specific wear rate (<5.0 × 10 −6 mm 3 /Nm). Raman spectroscopy indicated that the transferred graphite-like tribo-film onto the surface of Si 3 N 4 counterparts contributed to stable low friction. Additionally, XPS analysis on the DLC coatings' wear track suggested the rich BB bond might contribute to its high wear resistance. This successful improvement on element-doped DLC prepared by FCVA provided valuable insights for further exploration of DLC coating applied to various working situations.

Effects on Tribological Properties and Corrosion Resistance of Zr-doped DLC Films

Characteristics of DLC containing Ti and Zr films deposited by reactive magnetron sputtering

The Effects of Ti/Ni Doping on the Friction and Wear Properties of DLC Coatings

Enhanced tribological and corrosion properties of DLC/CrN multilayer films deposited by HPPMS

The Friction and Wear Properties of Metal-Doped DLC Films under Current-Carrying Condition

Improving the internal stress and wear resistance of DLC film by low content Ti doping

Synergistic Effect of Cr-Doped DLC Coatings and Lubricant Additives

Probing the Friction and Wear Behaviors of Diamond-Like Carbon Film in HCl and H2SO4 Media

Investigation of Mechanical and Tribological Properties of Super-Thick DLC Films with Different Modulation Ratios Prepared by PECVD

Tribo-mechanism of Amorphous Carbon Films under Corrosion Solution and Various Mechanical Loads

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

The effects of Cr and B doping on the mechanical properties and tribological behavior of multi-layered hydrogenated diamond-like carbon films

Effects of Tribological Behavior of DLC Film on Micro-Deep Drawing Processes

Effect of C2h2 Flow Rate on the Deposition of Zr-Zrc-Zrc/Dlc Gradient Nano-Composite Film on Biomedical Niti Alloy

The Impact of Dopants (B, H) on the Mechanical Behavior and Tribological Performance of DLC Film under Water Lubrication

Growth and Tribological Property Characterization of Diamond-Like-Carbon Films

Structural, Mechanical and Tribological Behavior of Different DLC Films Deposited on Plasma Nitrided CF170 Steel

Corrosion Behavior and Biocompatibility of Diamond-like Carbon-Coated Zinc: An In Vitro Study

The development of B/Cr co-doped DLC coating by FCVA deposition system and its tribological properties at 300 °C

Mechanical properties of La2O3 doped diamond-like carbon films

Micro/Nanomechanical and Tribological Properties of Thin Diamond-Like Carbon Coatings