Abstract:The trochoidal milling mode is widely used in high-speed machining, and due to good adaptability and flexible posture adjustment, ball-end milling cutters are conducive to complex surface machining with this mode. However, the processes of material removal and formation of machined micro surfaces are very difficult to describe as the profile of cutter teeth is complex and the trajectory direction changes continuously during the trochoidal milling process. A modeling method for the generation of micro surface topography of ball-end milling in the trochoidal milling mode is put forward. In this method, the locus equation of each cutter tooth is established based on the principle of homogeneous coordinate transformation, after which a Z-MAP algorithm is designed to simulate the micro surface topography. The Z-MAP algorithm can quickly obtain the part grid nodes potentially swept by the cutter tooth within a unit time step through the establishment of servo rectangular encirclement and instantaneous sweeping quadrilateral of the element of cutter teeth; the part grid nodes actually swept are further determined through an angle summation method, and the height coordinate is calculated with the method of linear interpolation according to Taylor’s formula of multivariate functions. Experiments showed that the micro surface topography resulting from ball-end milling in the trochoidal milling mode had high consistency with the simulation, which indicates that the proposed method can predict micro surface topography in practical manufacturing. In addition, a comparison of micro surface topography between trochoidal milling and ordinary straight-linear milling was conducted, and the results showed that the former was overall superior to the latter in resulting characteristics. Based on this conclusion, the influences of cutting parameters of ball-end trochoidal milling on surface characteristics, particularly amplitude and function, were analyzed according to the simulated micro surface topography data.

Prediction and Analysis of Machined Surface Texture in Ball-end Milling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Modeling and simulation of surface topography in five-axis ball end milling

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling

Modeling and Analysis of Micro Surface Topography from Ball-End Milling in a Trochoidal Milling Mode

A surface quality prediction model considering the machine-tool-material interactions

Effect of process parameters on micro-textured surface generation in feed direction vibration assisted milling

Theoretical and Experimental Investigation of Surface Textures in Vibration-Assisted Micro Milling

Prediction of Surface Topography in Robotic Ball-End Milling Considering Tool Vibration

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling

Study on simulation and experiment of non-circular gear surface topography in ball end milling

Analysis of High-Speed Milling Surface Topography and Prediction of Wear Resistance

Influence and prediction of tool wear on workpiece surface roughness based on milling topography analysis

Machined surface prediction and reliability analysis in peripheral milling operations