Abstract:Background: To evaluate the quality of in vitro fenestrations during in situ fenestration (ISF) and investigate the differences between needle and laser puncture in current stent-grafts. Methods: An in vitro study evaluated the damage created by needle ISF on stent-graft fabrics versus laser ISF. Fenestrations were made in 5 different commercially available stent-grafts, including polyester stent-grafts (Relay, Valiant and Hercules) and expanded polytetrafluoroethylene (ePTFE) stent-grafts (TAG and Ankura). Each stent-graft received fenestration by needle and laser separately, followed by gradual dilation (4 mm, 6 mm, 8 mm, and 10 mm sequentially) of noncompliant balloons. Quantitative and qualitative evaluations including fenestration diameter, area, shape and margins were conducted using light microscopy and scanning electron microscope. Results: The primary fenestrations created by needle were slit-like with visible cut-off fibers in polyester stent-grafts and were almost circular with clear margins in ePTFE stent-grafts; those created by laser were squared or elliptical with ragged edges and burned fibers in all the stentgrafts. Fabric debris and toxic particles due to burning of the material were generated during laser-assisted fenestration. The Primary holes in polyester stent-grafts (Relay, Valiant and Hercules) by needle showed smaller area (0.05 mm(2) vs. 0.22 mm(2), 0.52 mm(2) vs. 0.70 mm(2) and 0.28 mm(2) vs. 0.46 mm(2); P < 0.01) and worse shape (0.93 vs. 2.46, 1.17 vs. 2.33 and 0.93 vs. 2.47; P < 0.01) than those by laser, while larger area (0.67 vs.0.43, 0.59 vs.0.45; P < 0.05), better shape (3.93 vs. 2.53, 3.90 vs. 2.93; P < 0.05) and better margin (3.83 vs. 2.47, 3.83 vs. 2.53; P < 0.05) in ePTFE stent-grafts (TAG and Ankrura). After gradual balloon dilation, the final holes showed no evident difference in maximal length, fenestration area, scores of shape and margin between the 2 ways of fenestration (P > 0.05). Ankura stent-graft showed the largest holes with best quality than the others. Conclusions: The primary fenestrations were different between needle and laser puncture, laser induced fabric debris and toxic particles release should be cautiously considered. The final fenestrations were similar after gradual balloon dilation.

Laser Processing Technology and Its Research Progress of Vascular Stent

Computational biomechanics and experimental verification of vascular stent

Design and fabrication of coronary stent

The fabrication of micro-hole stent by laser cutting

Experimental Analysis of In Situ Fenestration of Endovascular Stent-Grafts: Comparison between Needle and Laser Puncture

Application of Laser Technology in Endovascular Imaging and Therapy

A Review on Manufacturing and Post-Processing Technology of Vascular Stents

Experimental Study on the Process and Performance of Laser-Assisted Vascular Anastomosis Based on Response Surface Methodology

Structural Design of Vascular Stents: A Review

Experimental research on laser interference micro/nano fabrication of hydrophobic modification of stent surface

Finite Element Simulation and Experimental Verification of Laser Machining of Nitinol Tubes

High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion

Research Progress on Wafer Laser Cutting Technology

Exploring the potential of laser-textured metal alloys: Fine-tuning vascular cells responses through in vitro and ex vivo analysis

Development of Materials Science and Technique in Stent for Interventional Surgery

Femtosecond laser precision machining of biodegradable heart stent

Technical Study on Laser Processing Technology of the Autoflow Balancing Valve Spool

3D Printing and Characterization of the Biodegradable Vascular Stent

Study on Surface Quality and Mechanical Properties of Micro-Milling WE43 Magnesium Alloy Cardiovascular Stent

Experimental Study on the Process and Performance of Pre‐Dressing‐Assisted Laser Joining of Vascular Tissues

Micro/Nano Periodic Surface Structures and Performance of Stainless Steel Machined Using Femtosecond Lasers