Abstract:This paper describes the experimental parameters involved in the femtosecond laser micromachining of biodegradable poly(L-lactide) which is frequently used in biomedical applications such as vascular stents or scaffolds. We investigated the influence of laser pulse energy, scanning strategy and number of overscans on the laser cutting throughput. The process parameters that enable reducing a heat affected zone were determined. As a result, the optimal scanning strategy was determined in order to obtain high aspect ratio trenches in a 380μm thick biodegradable polymer sheet. Over the last decade we have observed the increasing involvement of femtosecond lasers for manufacturing biomedical devices made of biodegradable polymers. A small beam diameter and short pulse duration enable forming complex, submillimeter geometrical shapes in polymers such as vascular stents which cannot be manufactured using traditional techniques e.g. injection moulding or mechanical processing. The shortening of pulse duration below electron cooling time enables reduction of thermal and mechanical damage to the surrounding material. Furthermore, extremely high power density causes multiphoton absorption that allows for processing wide-bandgap dielectrics. Together with high pulse energy in the range of tens of microjoules attainable in modern industrial constructions, femtosecond lasers appear as a perfect tool for efficient machining of polymers. There are, however, several limitations regarding the use of femtosecond lasers for processing heat sensitive biodegradable polymers. As it was reported previously, laser micromachining with ultrashort pulse lasers can result in thermal load affecting the surrounding material causing its melting, crack formation [1-2] or crystallisation [3]. Nevertheless, heat accumulation appears mainly for a high repetition rate, high pulse energy and multiple scanning cycles. Depending on the relation between laser wavelength, fluence, repetition frequency and pulse overlapping, the process can be designed to be a-thermal [2]. In order to preserve a relatively high process throughput one can apply different strategies such as decreasing pulse overlapping [4] or * E-mail: bogusz.stepak@pwr.edu.pl using gas assist [2]. Another issue affecting the processing speed is the reflection and scattering of incident light in a V-shaped groove causing a decrease of the ablation rate with an increasing number of over-scans [5]. This article presents the results of the cutting process optimisation of medical grade poly(L-lactide) (PLLA – RESOMER® L 210 S, Evonik Biomaterials). PLLA is a semicrystalline aliphatic polyester which is transparent in a wide optical window beginning from 250nm up to near infrared. The thickness of an amorphous polymer sheet prepared using a hydraulic press was 380±10μm. The experiments were performed using s laser from Active Fiber Systems Jena with the pulse duration τ=450fs, wavelength λ=515nm and fixed pulse repetition frequency 10kHz. The focal length of the lens was 163mm and the beam diameter in the focal plane was 25μm. The laser cutting trials were performed in ambient air using a test pattern that consists of six grooves with a length of 1mm and a different width (Fig. 1). The grooves were produced by bidirectional scanning in the y direction each with the hatching distance10μm.

Femtosecond laser precision machining of biodegradable heart stent

Personalized Artificial Tibia Bone Structure Design and Processing Based on Laser Powder Bed Fusion

3D Printing and Characterization of the Biodegradable Vascular Stent

High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion

Optimization of femtosecond laser cutting of a biodegradable polymer for medical devices manufacturing

Mitigation of bio-corrosion characteristics of coronary artery stent by optimising fs-laser micromachining parameters

Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting

Tunable zinc corrosion rate by laser surface modification for implants with controllable degradation direction

3D printed peripheral vascular stents based on degradable poly(trimethylene carbonate-b-(L-lactide-ran-glycolide)) terpolymer

Achieving high mechanical properties of biodegradable vascular stents by four-axis 3D printing system and heat treatment

<scp>3D</scp> printed peripheral vascular stents based on degradable poly(<scp>trimethylene carbonate‐b‐(L‐lactide‐ran‐glycolide)</scp>) terpolymer

Femtosecond laser manufacturing technology for microstents as innovative medical devices to treat open-angle glaucoma

The Development of Design and Manufacture Techniques for Bioresorbable Coronary Artery Stents

Maglev-fabricated long and biodegradable stent for interventional treatment of peripheral vessels

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

Electrochemical polishing, characterisation and in vitro evaluation of additively manufactured CoCr stents with personalised designs

Micro/Nano Periodic Surface Structures and Performance of Stainless Steel Machined Using Femtosecond Lasers

Design and Mechanical Performance Evaluation of WE43 Magnesium Alloy Biodegradable Stents via Finite Element Analysis

High-Precision Implant Cavity Fabrication Using Femtosecond Lasers

Artificial Coronary Vascular Stents Fabrication Using Biodegradable Material Compounds of PLA/PGA-co-Chitosan

Femtosecond laser optimization of PEEK: efficient bioactivity achieved by synergistic surface chemistry and structures