Abstract:Objective: To analyze the quantitative relationship between the number of layers of laser pulses and the amount of step in ultra-short pulse laser cutting of cortical bone, optimize the robot's vertical single stepping parameters, and to explore the feasibility of automatic preparation of dental implant cavity using robot controlling ultra-short pulse laser, in order to lay the foundation for automated dental implant surgery. Methods: Eight pig ribs were segmented into to make 16 specimens. Using the robotic surgical system and path planning software independently developed by our group, circular holes with a diameter of 4 mm were cut two-dimensionally in the rib segments to obtain the quantification relationship of the number of laser pulse layers (n) and the depth of two-dimensional (2D) cutting (d). When conducting the three-dimensional (3D) cutting procedure, the number of pulse layers were set to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 layers, the vertical single step amount was an integer value corresponding to the results of 2D cutting depth, and the number of pulses (n') corresponding to the minimum difference between the theoretical depth of cut and the actual depth of cut was obtained. The n' was taken as the most suitable single step pulse layer, the rib segment was cut, and the depth of single cut was measured while the integer value was taken as the most appropriate vertical single step amount (d'). The vertical parameters of laser single stepping were set as n' layer pulse and d' μm step size. The 3D cutting produces a cylindrical cavity with a diameter of 4 mm and a height of 2 mm to evaluate the 3D cutting accuracy (the difference between the measured value and the theoretical value of cutting diameter or depth). Ten 4 mm×3 mm implant holes were automatically prepared on the bilateral femurs of 5 Japanese big white rabbits, and ten 4 mm×3 mm implants made by 3D printer were artificially implanted, and the preparation effect of the implant cavities was evaluated. Results: The quantitative relationship curve between the number of laser pulses (n) and 2D depth of cut (d) showed a linear upward trend. The linear fitting obtained the quantitative relation function formula d=9.278 4 n±26.763 0, R(2)=0.988 9. The optimum number of single step pulse layers was 5 layers, and the vertical single step amount was 50 μm, so as to set the vertical parameters of a single step of a 3D cutting, and the 3D cutting diameter accuracy was (3.98±2.87) μm, with a depth accuracy of (15.42±5.44) μm. Automated preparation of 10 implant cavities on the femur of the rabbit were completed. When the implants were placed into the implant cavities, there was resistance, but they were fully seated and primary stability has been achieved after seating implant placement. Conclusions: The method of non-contact automatic preparation of dental implant cavities using robot controlling ultra-short pulse laser is feasible. By optimizing the single cutting process parameters, precise control of laser cutting cortical bone can be realized.

High-Precision Implant Cavity Fabrication Using Femtosecond Lasers

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

[Preliminary study on the automatic preparation of dental implant socket controlled by micro-robot]

In Vitro Evaluation of Ultrafast Laser Drilling Large-Size Holes on Sheepshank Bone.

Effect of Optical Wedge Rotary on Ablation Efficiency of Femtosecond Laser on Dental Hard Tissue and Restorative Materials.

Tissue Ablation with Multi-Millimeter Depth and Cellular-Scale Collateral Damage by a Femtosecond Mid-Infrared Laser Tuned to the Amide-I Vibration

Real-time Spectral Response Guided Smart Femtosecond Laser Bone Drilling

Intelligent Femtosecond Laser Bone Drilling Via Online Monitoring and Machine Learning

Optimization of processing parameters and conditioning for efficient bone tissue ablation by femtosecond laser

[Femtosecond pulsed laser ablation of dental hard tissues with numerical control: a roughness and morphology study].

Femtosecond Laser for Cavity Preparation in Enamel and Dentin: Axial Wall Taper Related Factors

Laser-Induced Cavitation-Assisted True 3D Nano-Sculpturing of Hard Materials

Experimental Study on Femtosecond Laser-Induced Microjet-Assisted Trepan Drilling of Silicon Wafer

Femtosecond Laser Precision Engineering: From Micron, Submicron, to Nanoscale

A novel method to fabricate micro-nano hierarchical topographies on zirconia dental implant using femtosecond laser

Research on the Surface Preparation of Pure Ti Implant Using Femtosecond Laser and Short-Term Implants

The evaluation of prepared microgroove pattern by femtosecond laser on alumina-zirconia nano-composite for endosseous dental implant application

Femtosecond fiber laser for femtosecond LASIK

An automatic robotic system for three-dimensional tooth crown preparation using a picosecond laser.

Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells

Preliminary Experiments of a Miniature Robotic System for Tooth Ablation Using Ultra-Short Pulsed Lasers.