Abstract:Hypoeutectic Al-Mg 2 Si alloys are distinguished as premier structural materials for transportation purposes, celebrated for their superior ductility and exceptional corrosion resistance. Enhancing strength and evaluating castability are critical for broadening their applicability. This study meticulously explores the influence of copper (Cu) on the mechanical attributes and castability of AlMg5.4Si2 alloys through detailed tensile testing and casting experiments utilizing constrained rod casting and spiral molds. Our findings reveal that increasing Cu levels refine grain size and condense the spacing of secondary dendrite arms, although this leads to a diminishing effect on the beneficial modifications introduced by bismuth (Bi). Specifically, the addition of 0.1 wt% Cu elevates the yield strength and ultimate tensile strength by 19 and 31 MPa, respectively. However, when Cu concentration exceeds 0.1 wt%, there is a marked degradation in mechanical properties due to the formation of the agglomerated S-Al 2 CuMg phase. Furthermore, the Cu enrichment escalates the hot tearing sensitivity and diminishes fluidity, predominantly due to an expanded freezing temperature range and an increased propensity for dendritization. The comparisons between experimental castability outcomes, numerical simulations and theoretical benchmarks have validated the predictive potential of these methodologies. These insights afford a nuanced comprehension of the multifaceted impacts of microalloying on the Al-Mg 2 Si cast alloys, and pave the way for compositional refinements in industrial practices. Critically, this research not only underscores the delicate balance required in alloy design, but also opens new pathways for enhancing the performance of transportation materials through strategic microalloying.

Study on Microstructure and Mechanical Properties of Al-Si-Cu-Mg Alloy Prepared by Casting and Powder Metallurgy

Comparative Study of Performance Comparison of AlSi10Mg Alloy Prepared by Selective Laser Melting and Casting

Effect of Casting Process and Thermal Exposure on Microstructure and Mechanical Properties of Al-Si-Cu-Ni Alloy

Effects of Cu Content and Heat Treatment Process on Microstructures and Mechanical Properties of Al−Si−Mg−Mn−xCu Cast Aluminum Alloys

Effect of Mg and Cu Additions on Microstructure and Mechanical Properties of Squeeze Casting Al-Si-Cu-Mg Alloy

Microstructure and Mechanical Properties of As-Cast and Extruded Mg-8Li-3Al-0.7Si Alloy

Effect of Mg addition on microstructure and mechanical properties of Al-Si-Cu-Fe alloy with squeeze casting

Influence of Processing Procedure on Mechanical Properties of A319 by Comparison between Casting and Powder Metallurgy

MICROSTRUCTURES AND ROOM TEMPERATURE MECHANICAL PROPERTIES OF Al-6.3Zn-2.8Mg-1.8Cu CASTING ALUMINUM ALLOY

A Comparative Study on the Microstructures and Mechanical Properties of Al-10Si-0.5Mg Alloys Prepared under Different Conditions

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

Effects of Cu Content and Cu/Mg Ratio on the Microstructure and Mechanical Properties of Al–Si–Cu–Mg Alloys

Microstructure and Mechanical Properties of as-Cast Mg-Li-Al-xSi Alloys

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Effects of different casting mould cooling rates on microstructure and properties of sand-cast Al-7.5Si-4Cu alloy

Comparison of the semisolid squeeze casting and gravity casting process on the precipitation behavior and mechanical properties of the Al-Si-Cu-Mg alloy

Effect of Si content on microstructures and mechanical properties of Al-5.0Cu-0.6Mn-0.7Fe alloy prepared by squeeze casting

Effects of Adding Trace Modification Elements and Heat Treatment on the Strength and Toughness of AlSi8Cu2MgMn Alloy

Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys

Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy

Correlation of Solidification Microstructure Refining Scale, Mg Composition and Heat Treatment Conditions with Mechanical Properties in Al-7Si-Mg Cast Aluminum Alloys