Abstract:High strength low-alloy (HSLA) steel has been widely used in buildings, bridges, ships and automobiles because of the remarkable high strength and forming property. Conventional HSLA steels are strengthened by a combination of grain refinement, solid-solution strengthening and precipitation hardening, and the contribution of precipitation hardening is considered to be minor, since many of the alloying elements are added to HSLA steels in the past basically for the strengthening of grain refinement. However, in recent research, yield strengths up to 780 MPa have been achieved in Ti and Mo bearing HSLA sheet steels by producing microstructures that consist of a ferritic matrix with nanometer-sized carbides, and the precipitation strengthening has been estimated to be approximately 300 MPa. Nowadays, thermo mechanical controll process (TMCP) is widely used to process HSLA steels, the final temperature of ultra-fast cooling (UFC) plays a decisive role for microstructure evolution and precipitation behavior, and finally determines the mechanical properties of the steels. In this work, the effects of final temperature after UFC on microstructural evolution, precipitation behavior and micro-hardness of Nb-V-Ti bearing low alloy steel were studied by using the thermal mechanical simulator, OM, HRTEM and micro-hardness instrument. The results showed that the microstructure and nucleation sites of micro-alloy carbides changed with final temperature after UFC. The microstructure changed from bainite to pearlite and ferrite and the nucleation sites changed from bainite to ferrite with final cooling temperature increasing. The number density of the precipitates in ferrite Matrix was greater than that in bainite. Furthermore, the number density of the nanometer sized carbides got the maximum values at 620 degrees C. The aspect ratios of the precipitates were close to 1, which meat that the precipitation morphology close to spherical. The sizes of the carbides were all less than 10 nm and became smaller with the decrease of final cooling temperature. Through the calculation by Orowan mechanism, the contributions of the precipitation strengthening to yield strength could reach 25.6% at the final cooling temperature of 620 degrees C.

Thermodynamic Research on Carbonitride in Low Carbon Microalloyed Steels by Thermo-calc Software

Thermodynamic calculations of precipitation behavior in Nb microalloyed steels

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Effect of TiC on Microstructures and Mechanical Behaviors of Low-Density Nb-Ti-Al Alloys Fabricated by Laser Solid Forming

Study on Carbonitride in Nb-V-N Micro-Alloyed Steel

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Thermodynamics of the Fe-Nb-C-N system and the solubility of niobium carbonitrides in austenite

Analysis on Thermo-dynamic Stability of Cr-Nb-Fe-C System

Thermodynamic calculations of the second-phase precipitation in Nb-Ti microalloyed steel

Comparative Study of VC, NbC, and TiC Interphase Precipitation in Microalloyed Low-carbon Steels

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Precipitation Behavior of Nanometer-Sized Carbides in A Nb-Ti-Bearing Low-Carbon Steel

Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum

Precipitation of Microalloyed Carbonitride and Its Strengthening Mechanism in Low Carbon Steels Containing Nb and Mo

Effect of Ti/V Ratio on Thermodynamics and Kinetics of MC in Γ/α Matrices of Ti–V Microalloyed Steels

Understanding the Role of Carbon Atoms on Microstructure and Phase Transformation of High Nb Containing Tial Alloys

Effect of Final Temperature after Ultra-Fast Cooling on Microstructural Evolution and Precipitation Behavior of Nb-V-Ti Bearing Low Alloy Steel

Precipitation Behavior and Kinetics in Nb-V-bearing Low-Carbon Steel

Effect of carbon on microstructure of Nb-base alloys

PRECIPITATION OF CARBIDE AND NITRIDE IN HIGH TEMPERATURE TENSILED SPECIMENS OF Nb-Ti MICRO ALLOYING STEEL CC SLABS

Precipitation Behaviors of Nanometer-sized Carbides in a Niobium-Titanium Contained Low-Carbon Steel