Abstract:High strength micro-alloyed steel has been widely used in automobile and machines because of the remarkable high strength and forming property which are attributed to nano-precipitates and refinement of the organization. Since the nano-precipitates are mostly nucleated between austenite/ferrite transition and ferrite can significantly advance strength, it is important to investigate precipitate behavior in coiling process. Nanoindentation technology provides a chance to study the special influence of nano-precipitates on the micro-properties of ferrite. The effect of cooling rate during continuous cooling process and coiling process on microstructural evolution and micro-hardness of Nb-Ti micro-alloyed steel were studied by using the thermal mechanical simulator, micro-hardness instrument, TEM and nanoindentation instrument. The precipitate behaviors of (Nb,Ti)C in coiling process and its effect on nano-hardnesss of ferrite were discussed. Experiments results indicated that the increase of cooling rate in continuous cooling process and coiling process could promote the microstructure transition from ferrite and pearlite to bainite. The micro-hardness of the tested steel increased with the increase of cooling rate in continuous cooling process, and decreased with the cooling rate in coiling process because of the large number of the dispersive nano-precipitate in ferrite which could improve the strength of matrix. The smaller cooling rate could promote volume fraction of (Nb, Ti)C particles in ferrite because there was enough time for the nucleation and growth of (Nb, Ti)C precipitates. When the cooling rate in coiling process was 0.1 degrees C/s, precipitates were dispersive in ferrite matrix with a diameter of less than 10 nm. The nanohardness and Young's modulus of ferrite were 4.13 and 249.3 GPa for Nb-Ti micro-alloyed steel, 2.64 and 237.4 GPa for C-Si-Mn steel. The contribution of nano-precipitates to nanohardness of ferrite reached 1.49 GPa.

Precipitation Behaviors of Nanometer-sized Carbides in a Niobium-Titanium Contained Low-Carbon Steel

Influence of Finishing Cooling Temperature and Holding Time on Nanometer-Size Carbide of Nb-Ti Microalloyed Steel

Interphase precipitation behavior of nano-sized carbides in low carbon steel

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Precipitation Behavior Of (Nb, Ti)C In Coiling Process And Its Effect On Micro-Mechanical Characteristics Of Ferrite

Effects of Carbon and Niobium on Microstructure and Properties for Ti Bearing Steels

Precipitate Evolution in 22Cr25NiWCuCo(Nb) Austenitic Heat-Resistant Stainless Steel during Heat Treatment at 1200 °C

Evolution from clusters to precipitates in niobium-micro-alloyed ferritic steel: A combined in situ scanning transmission electron microscopy and atomistic study

Impact of Niobium Addition and Non-Metallic Inclusions' Characteristics on the Microstructure and Mechanical Properties of Low-Carbon CrNiMnMoB Ultrahigh-Strength Steel: A Comprehensive Investigation

Microstructure, Precipitation, and Strengthening Mechanism of a High‐Strength Q1100 Heavy Steel Plate via Niobium–Boron Microalloying Technology

Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels

Strain-induced Precipitation Kinetics of Nb(C,N) and Precipitates Evolution in Austenite of Nb–Ti Micro-Alloyed Steels

Effect of Mo on Nano‐Precipitation Behavior and Microscopic Mechanical Characteristics of Ferrite

Microstructure, Texture, and Formability of Nb+Ti Stabilized High Purity Ferritic Stainless Steel

Effect of Nb on inclusions and phase transformation in simulated high heat input coarse-grain HAZ of Nb/Ti low carbon microalloyed steel

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Precipitation Behavior of Nb in Steel under Ultra Fast Cooling Conditions

The Influence of the Hot-Rolling Temperature on the Microstructure and Mechanical Properties of Ti-Nb Microalloyed 21%Cr Ferritic Stainless Steel

Complex isothermal precipitation behavior of V(C, N) in V-, N-added low carbon steel

Characterization and Control of Secondary Phase Precipitation of Nb-V-Ti Microalloyed Steel during Continuous Casting Process

Microstructure evolution and quantitative analysis of mechanical properties of cold-rolled low carbon niobium steel