Abstract:The control of steel composition and evolution of inclusions during electroslag remelting (ESR) of NiCrMoV high‐strength steel are investigated by considering slag systems, atmosphere protection, and surface quality of the consumable electrode. The formation mechanism of inclusions is elucidated through thermodynamic calculations. Appropriate process parameters are proposed to control the composition and cleanliness of steel during the ESR. Herein, the control of steel composition and evolution of inclusions during the electroslag remelting (ESR) of NiCrMoV high‐strength steel are investigated by laboratory experiments and thermodynamic calculations. The effects of slag systems, atmosphere protection, and surface quality of the consumable electrode are discussed. Results show that slag containing 5% TiO2 and 2% SiO2 is beneficial for controlling Ti and Si losses in steel during the ESR. Using argon gas protection reduces the total oxygen (TO) and nitrogen contents in ESR ingots and improves steel cleanliness, while it has little influence on the types of inclusions. The oxide scales on the electrode surface lead to the reoxidation of liquid steel during the ESR. The TO content increases to 113 ppm and Si, Ti, Als, and Mn contents in ESR ingots are considerably reduced. The inclusions are transformed from Al2O3–CaO–TiOx–MgO to MnO–SiO2–Al2O3–TiOx. Thermodynamic calculations reveal that the decrease in temperature promotes the precipitation of Ca2Ti2O5 and Ca2Ti2O6 in inclusions. As the oxygen content from reoxidation increases, the formation of SiO2 and MnO in inclusions in ESR ingots is promoted. Appropriate process parameters are proposed to control the composition and cleanliness of steel during the ESR.

Effect of Unsteady Continuous Casting Condition on Cleanliness of 40Mn2 Steel

Analysis of 40Mn2 Steel Cleanliness in LF Procedure

Cleanliness of molten steel in continuous casting tundish

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

Laboratory investigation on quantitative effect of ladle filler sands on the cleanliness of a bearing steel

Influence of Ladle Exchange on Inclusions in Transition Slabs of Continuous Casting for Automotive Exposed Panel Steel

Study on Inclusions of Titanium-Stabilized Stainless Steel

Functional Failure Behavior of Submerged Entry Nozzle during the Continuous Casting Process of the Bearing Steel GCr15

Formation mechanism and control of a kind of pit-shaped defect in Cf53 rolled products

Study of the Solute Micro-Segregation Behaviour of Bainite Rail Steel in the Continuous Casting Process

Analysis and Control of Central Cracks in the Bloom Continuous Casting of Microalloy 49mnvs3 Steel

The Effect of Temperature, Cooling Rate and Casting Speed on Quality of Continuous Cast Steel Billets

Analysis on clogging of submerged entry nozzle in continuous casting of high strength steel with rare earth

Inclusion characterization and cleanliness assessment for high-strength, low-alloy steels

Effect of M-EMS current intensity on the subsurface segregation and internal solidification structure for bloom casting of 42CrMo steel

Effect of stirring on the solidification structure and segregation of 60Si2MnA spring steel during continuous casting

Evolution mechanism of inclusions during refining and continuous casting process of 321H stainless steel

Study on microsegregation model and MnS precipitation behavior of continuous casting ultra-low sulfur steel slab

Control of Steel Composition and Evolution of Inclusions During Electroslag Remelting of NiCrMoV High‐Strength Steel

Numerical Study On Solidification Behavior And Structure Of Continuously Cast U71mn Steel

Effect of calcium treatment on evolution of inclusions in low-carbon aluminum-killed steel