Abstract:The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (PT) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (PT). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (PT) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (PT) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (PT) increase in continuous casting process, the secondary dendritic arm spacing (λ2) increase, i.e., the dendritic morphology became coarsen.

The Effect of Temperature, Cooling Rate and Casting Speed on Quality of Continuous Cast Steel Billets

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting

Analysis of Thermo-fluidic and Phase Change Behaviour of Liquid Steel in a Continuous Billet Caster Mould: Effect of Casting Speed

Numerical simulation of shrinkage porosity defect in billet continuous casting

The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

Study on solidification and heat transfer of billet shell in a new-structure high-speed continuous casting mold

Investigation of Corner Cracks in Continuous Casting Billet Using Thermomechanical Model and Plant Measurements

Some Aspects of Continuous Casting of Low Carbon Microalloyed Steels with Niobium and Titanium

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Simulation and Experimental Study on the Effect of Superheat on Solidification Microstructure Evolution of Billet in Continuous Casting

Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting

Simulation and Study of Influencing Factors on the Solidification Microstructure of Hazelett Continuous Casting Slabs Using CAFE Model

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Homogenization Path Based on 250 mm × 280 mm Bloom under Mixed Light and Heavy Presses: Simulation and Industrial Studies

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab

Numerical analysis of the comprehensive effect of continuous casting process parameters on the continuous casting billet remelting

A Method for Quality Inspection of Continuous Casting Billet Based on Infrared Flaw Detection and Two-Dimensional Image

Quality Improvement of 60 Steel Billets in Kunsteel

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Numerical Modelling of Chamfer Billet of High Carbon Steel During Continuous Casting