Abstract:Rapidly expanding of millimeter wave communication has made Ka-band filter fabrication to gain more and more attention from the researcher. Described in this paper is a high quality UV-lithographic process for making high aspect ratio parts of a coaxial Ka band dual mode filter using an ultra-thick SU-8 photoresist layer, which has a potential application in LMDS systems. Due to the strict requirements on the perpendicular geometry of the filter parts, the microfabrication research work has been concentrated on modifying the SU-8 UV-lithographical process to improve the vertical angle of sidewalls and high aspect ratio. Based on the study of the photoactive property of ultra-thick SU-8 layers, an optimized prebake time has been found for obtaining the minimum UV absorption by SU-8. The optimization principle has been tested using a series of experiments of UV-lithography on different prebake times, and proved effective. An optimized SU-8 UV-lithographical process has been developed for the fabrication of thick layer filter structures. During the test fabrication, microstructures with aspect ratio as high as 40 have been produced in 1000 gin ultra-thick SU-8 layers using the standard UV-lithography equipment. The sidewall angles are controlled between 85 similar to 90 degrees. The high quality SU-8 structures will then be used as positive moulds for producing copper structures using electroforming process. The microfabication process presented in this paper suits the proposed filter well. It also reveals a good potential for volume production of high quality RF devices.

Process Study on Folded Waveguide Microfabricated with SU-8 Photoresist

Microfabrication of Folded Waveguide Using UV-LIGA for 220 GHz Traveling Wave Tube

Design, Fabrication and Measurement of A Novel 140 Ghz Folded Waveguide Based on Su-8 Uv-Liga Technology

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Microfabrication of a Dual-Mode Rectangular Waveguide Filter

Fabrication of single-mode ridge SU-8 waveguides based on inductively coupled plasma etching

Study of TWT Slow Wave Structure Microfabricated by Ultraviolet Laser

Folded-type Waveguide and Its Application in High Power Millimeter Wave and THz Sources

Microfabrication of Air-Filled Rectangular Waveguide Using Dry Film As Sacrificial Layer

Terahertz Rectangular Waveguides by UV-LIGA with Megasonic Agitation

Standing Surface Acoustic Wave-Assisted Fabrication of Region-Selective Microstructures Via User-Defined Waveguides.

Research on Cold Characteristics of Bulk Micromachined Folded Waveguide Slow-Wave Structure

Study for 140 Ghz Folded Waveguide Traveling Wave Tube with Big Electron Tunnel

Ka-Band Filter Fabrication Based On Optimized Ultra-Thick Su-8uv-Lithographical Process

Optimized Su-8 Uv-Lithographical Process for A Ka-Band Filter Fabrication

Fabrication of a Three-Layer SU-8 Mould with Inverted T-shaped Cavities Based on a Sacrificial Photoresist Layer Technique

W-Band 4th Order Waveguide Filter Based on Double Layer SU8 Microfabrication.

A 0.34-Thz High-Power, Slow-Wave Structure: Designing and Microfabricating an H-Plane Ridge-Loaded Folded Waveguide

Microfabrication Technologies for Interaction Circuits of THz Vacuum Electronic Devices

The Folded Groove Guide, an Original Slow-Wave Structure for Millimeter-Wave TWT

A Rectangular Groove-Loaded Folded Waveguide for Millimeter-Wave Traveling-Wave Tubes