Ellipse-offset method for calculating the offset curve of ruled surface in WEDM

李论,赵万生,王刚,董玉文

DOI: https://doi.org/10.3969/j.issn.1009-279X.2001.02.013

2001-01-01

Abstract:A ellipse-offset method for machining of ruled surface in WireElectronic Discharge Machining is developed to calculate the offset curves for tool path planning. Computer implementation and illustrative examples are presented to prove the validity of this method.

What problem does this paper attempt to address?

A 3D Curve Offset Approach for Ruled Surface Generation in Engineering Design

Kun Jiang,Xionghui Zhou,Min Li,Qiang Niu

DOI: https://doi.org/10.48550/arXiv.1303.3578

2013-03-14

Abstract:Ruled surface is widely used in engineering design such as parting surface design of injection mold and checking surface design of checking fixture, which are usually generated by offsetting 3D curves. However, in 3D curve offset, there often exist break,interaction and overlapping problems which can't be solved by current CAD software automatically. This paper is targeted at developing a 3D curve offsetting algorithm for ruled surface generation, and three key technologies are introduced in details: An improved curve division method is proposed to reduce the offset accuracy error resulted from different offset distances and curvatures; An offsetting curve overlapping detection and elimination method is proposed; And then, a curve transition method is presented to improve curve offsetting quality for the break and intersection/overlapping regions, where a new algorithm for generating positive weights spherical rational quartic Bezier curve is proposed to bridge the breaks of offset curves to create a smooth ruled surface. Finally, two practical design cases, parting surface and checking surface generation, show that the proposed approach can enhance the efficiency and quality for ruled surface generation in engineering design.

Computational Geometry
An Improved Method of Tool Offsetting for Free Curve

肖凌剑,胡俊,王宇晗,吴祖育

DOI: https://doi.org/10.3321/j.issn:1006-2467.2004.07.038

2004-01-01

Abstract:The additional error to the free-form curve machining in the existing method of tool offsetting, which will greatly degrade quality incurve machining, was studied. An analysis on the additional error occurring in the machining of both convex curves and concave curves was carried out and the error's quantitative formula was brought out. On the base of the analysis, this paper proposed an improved method for tool offsetting, which eliminates the additional error. A ball-end mill for curve machining was considered.
Smoothing the Extrapolation of Four-Axis Simultaneous Control in Ruled Surface WEDM

Zi-Lun Li,Hao-Yu Chu,Wei-Wen Xia,Xue-Cheng Xi,Wan-Sheng Zhao

DOI: https://doi.org/10.1016/j.procir.2020.02.296

2020-01-01

Procedia CIRP

Abstract:Four-axis simultaneous control is indispensable when machining workpieces with tapers or ruled surfaces in wire electrical discharging machining (WEDM). Complex geometries are interpolated by a CNC controller according to the predefined correlated curves located respectively on the top and bottom surfaces of the workpiece. Complex geometries can be interpolated by adopting a sophisticated algorithm namely Unit Generalized Arc Length Increment (UGALI). Normally, the upper and lower wire guides have certain distances to the top and bottom surfaces of the workpiece respectively. Therefore, a post-processing calculation for the corresponding motions of both the upper and lower wire guides is necessary, which is so called extrapolation. However, short line segments generated by the extrapolation are not smooth due to enlarged truncation errors of the interpolation. Truncations errors lead to unsmooth motions of the upper and lower wire guides, which can bring disturbances to the discharge gap control.
Processing Method of Spatial Complicated Curved Surface of High-speed WEDM

Shen Xiao-long,Zhang Lai-xi,Yunlong Liu

2013-01-01

PRZEGLĄD ELEKTROTECHNICZNY

Abstract:To solve the difficult problems of machining spatial curved surface parts in high-speed wire cut electronic discharge machining (WEDM), an automatic indexing and turnover NC rotary table based on the mathematical models of spatial complicated curved surface was designed. Then the multi-axis movement WEDM system and its experimental device were established. Through machining experiment, it shows that the multi-axis movement WEDM system has high machining quality and low cost and has practical applicability, to produce a novel research direction for solving the difficult problems of machining spatial curved surface parts in high-speed WEDM.
The Study of Taper Programming System of LS-WEDM

Yang Sanqiang,Bai Jicheng,Guo Yongfeng,Deng Guanqun,Liu Shaoyuan,Bi Hui

DOI: https://doi.org/10.3969/j.issn.1009-279X.2008.03.009

2008-01-01

Abstract:The corresponding points in the up and down surface of the normal taper were calculated.The clearance compensate of the wire was analyzed.The method to get the trace of normal tapered work-pieces is realized by Visual C++.The traces of the wire center transformed to the trace of up wire lead wheel on the up surface and the trace of working table on the down surface.The 4-axis linkage in the taper machining is realized.
Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Zhiwei Lin,Jianzhong Fu,Hongyao Shen,Xinhua Yao

DOI: https://doi.org/10.1007/s00170-015-7275-z

IF: 3.563

2015-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:In generating a contour-parallel tool path, traditional offset methods usually offer an arc rounding option for superior sharp corners. For the inferior ones, however, they are left untreated. The inferior sharp corners are harmful to high-speed machining (HSM). They should be dealt with when they emerge for the first time; otherwise, they will be further inherited by the offset successors. In this paper, we presented a dual offset procedure to round the inferior sharp corners. For a given path, literally, the procedure conducts two offsets: at first, the path is offset inwards, generating an intermediate curve; then, this curve is further offset outwards, outputting the dual offset curve. The dual offset curve is guaranteed to be smooth. It is used to replace the original path. One side effect of this procedure is that many uncut regions will be left in the corner areas. These uncut regions are detected through a Boolean operation and removed by smooth clear-up tool paths. Finally, the dual offset and clear-up tool paths are connected with a set of linking arcs. The proposed smooth tool path generation method is implemented and verified by several examples. Comparative cutting simulations show that this method has a potential to improve the machining efficiency in terms of HSM with nearly a zero cost.
CAD/CAM software for manufacturing 3-D curved surfaces using WEDM

Fuzhu HAN,Gang CHENG,Ximing CHEN,Xiaoguang ZHOU,Masanori KUNIEDA

DOI: https://doi.org/10.3321/j.issn:1000-0054.2005.11.009

2005-01-01

Abstract:Conventional NC programming cannot guarantee precise and real-time control of the relative position between the wire electrode and the workpiece when a 3-D curved surface is machined using a wire electrical discharge machine(WEDM.A CAD/CAM software was developed to calculate the wire electrode position and orientation at the machining point based on the CAD data of the machined surface to determine the machining point movement direction according to the cross product between the normal vector at the present machining point and the vector along the wire electrode axis with the NC commands then automatically generated to machine the 3-D curved surface.A spherical surface was machined using the software,with the finished spherical surface matching well with the design shape.The results also show that machining accuracies greatly depend on the discharge gap and the tangential feeding mode.
Simulation Software Development for Curved Surface Machining by WEDM Based on Pro/ENGINEER

Chen Ximing,Han Fuzhu,Zhou Xiaoguang,Zhu Mingde

DOI: https://doi.org/10.3969/j.issn.1009-279X.2006.01.005

2006-01-01

Abstract:This study developed a CAD/CAM simulation software used for curved surface machining by 4-axes WEDM.Based on Pro/E and it's TOOLKIT and VC++6.0, according to the characteristics of WEDM,the software can output the NC codes and simulate the machining process for curved surface machining on the roughcast by obtaining machining track points data from the curved surface model,calculateing the position and orientation of electrode wire.
Helical Surface Creation by Wire Electrical Discharge Machining for Micro Tools

X. Cheng,X. H. Yang,Y. M. Huang,G. M. Zheng,Li

DOI: https://doi.org/10.1016/j.rcim.2013.10.010

IF: 10.103

2013-01-01

Robotics and Computer-Integrated Manufacturing

Abstract:In mechanical micromachining, micro tooling is one of the key factors affecting the finished geometrical accuracy and surface quality. To overcome the serious tool wear caused by relatively longer micromachining time, micro tools are usually made of ultra-hard materials such as polycrystalline diamond (PCD) or cubic boron nitride (CBN). Wire Electrical discharge machining (WEDM) is a good choice for efficient fabrications of micro tools made of ultra-hard materials. Considering the traces of wire motions form ruled surfaces, in this paper, typical custom micro milling tools with helical surfaces are generated by ruled surfaces. The simulation shows that the selection of guide lines and generating lines for ruled surface is the key point relating to the final geometrical accuracy and machining efficiency in custom micro tool fabrications by WEDM. Based on the mathematical models built in this paper, overcut can be avoided in the process planning stage for complicated helical surfaces. Furthermore, wire locations can be created conveniently by the introduced mathematical models for post processing in dedicated CAM systems.
Modeling and Simulation of Wire Electrode Deflection in WEDM

Zhi Chen,He Li,Yu Huang,Zhen Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amm.541-542.708

2014-01-01

Applied Mechanics and Materials

Abstract:In the process of wire electrical discharge machining, the wire electrode inevitably suffers bending deformation due to wire tension, electrostatic force, electrodynamics force, etc., and the deflection would make an clearly negative impact upon the machining accuracy, productivity and stability. In this paper, first of all, a novel modeling and simulation method is proposed for quantitatively calculating the wire deflection. Secondly, the mainly impact factors and trend of wire deflection have been concluded. Moreover, the feasibility of the model is proved by comparing with other researchers models. Eventually, the practical approaches of reducing wire deflection and improving the machining accuracy have been proposed.
Gap status identification and control of wire electrochemical micromachining

Kun Wang,Zhaoyang Zhang

DOI: https://doi.org/10.1109/MACE.2011.5988135

2011-01-01

Abstract:Wrie electrochemical micromachining (WEMM) is an electrochemical dissolution micro process using a micro wire electrode. The process can remove electrically conductive materials with the transferring of ions, so that high precision is achievable. The short-circuit worsened the machining stability. The two types of short-circuit in WEMM: clogging short-circuit and unavoidable short-circuit was analyzed, and the gap status in WEMM was identificated. The method of punitive function was used to optimize the velocity of feed forward, and the strategy of servo-control system were designed. The experiment shows that the method of gap control can improve the mahining stability. © 2011 IEEE.
The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Yu, Wujia,Fu, Jianzhong,Chen, Zichen

DOI: https://doi.org/10.1049/cp:20060857

2006-01-01

Abstract:A new method based on level-set methods for tool path generation in die-cavities machining is represented in this paper, which can resolve most topological problems in die-cavities pocket milling, and can enhance the efficiency and quality of the machining. For the tool paths are sets of offset curves between the cavities outline and the internal islands, this approach adopted the principle of level-set methods and treated with tool paths in one milling layer as shape-varying wave front curves. This method translated the problem how to generate offset tool paths into a problem to solve the expression of zero sets in different time of a 3D surface, which is called as level-set function. Compare with other conventional methods, this method overcame the shortages such as path singularities, self-interactions and complexity of implement ways, and generated tool paths naturally and stably by its inherent feature inherited from the level-set Methods. The illustrative example of compute implementation in this paper has proved the effectivity and succinctness of this method sufficiently. Therefore, as a feasible way, this method is suitable for generating tool paths for die-cavities NC machining.
Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Wenfeng Gan,Jianzhong Fu,Zhiwei Lin,Yuchun C. Li

DOI: https://doi.org/10.1109/MACE.2010.5536719

2010-01-01

Abstract:Because of its high axial rigidity and metal removal rate, plunge milling is employed for pocket walls roughing in aircraft framework manufacturing and dies-and-molds industry. A new method of tool-path planning for plunge milling based on constant scallop height is presented in this paper to determine the proper interval between two adjacent CC (cutter contact) points. The objective is to keep the scallop height constant across the machined surface such that the number of CL (cutter location) points are minimized, while keeping machined surface within given error. The mathematical model is experimentally validated by computer simulation test. Results indicate that isoscallop machining achieves the specified machining accuracy with fewer CL points than existing tool path generation approaches. In a word, the proposed method offers an efficient solution for plunge milling tool path scheduling on pocket walls. ©2010 IEEE.
Positioning Algorithm for 5-Axis Machining of Ruled Surfaces Based on Radius and Angle Offset

XI Guang,WU Guangkuan,ZHENG Jiansheng

DOI: https://doi.org/10.3901/jme.2008.04.092

IF: 2.964

2008-01-01

Chinese Journal of Mechanical Engineering

Abstract:An analytical model for 5-axis flank milling ruled surfaces tolerance is built considering curvature of the baseline.A new concept angle offset is advanced based on studying the relationship between tool axis vector and gcneratrix,the offset angle evaluate equation is obtained.Radius and angle(RA) offset algorithm is put forward and applied to calculate tool location data for 5-axis flank milling ruled surfaces to improve the error distribution of the whole milled surface and eliminate the tolerance caused by the different direction of the normal vector,which make sure two baseline of the surface machined precisely.The influences of parameters such as length of generatrix,angle of two normal vectors of generatrix end point to the error distribution are analyzed by an example.The error distribution index of radius offset algorithm and RA offset algorithm is contrasted,and the result shows that the latter one has higher precision and sounder process technology.
Calculation of Cutter-location and Error Analysis in Numerical Control Flank Milling of Twisted Ruled Surface Impeller

Yonglin Cai,Guang Xi,Jianzhong Cha

DOI: https://doi.org/10.3321/j.issn:0253-987X.2004.05.019

2004-01-01

Abstract:A new met hod of calculating cutter2location in numerical cont rol flank milling of twisted ruled surface impeller is presented. The two end point s of generat rix of ruled surface are off setted firstl y along t heir normal vector by a given distance ,and t he line linking t he two off setted point s is taken as t he cutter axis. The distance f rom two off setted point s to cutter axis is determined as t he cutter radius. The equation of contact curve between cylinder cutter and ruled surface in machining is induced , and t he machining error estimation is provided simul2 taneously. This met hod can keep t he machining error on two end point s of generat rix to be zero . The scallops between adjacent tool pat hs are zero in t heory when it is applied for flank milling of ruled surface in layers along height direction of blade.
Algorithm for Calculating Theoretical Errors of Undevelopable Ruled Surface Model in Flank Milling

WU Guang-kuan,XI Guang,FAN Hong-zhou,ZHENG Jian-sheng

DOI: https://doi.org/10.3969/j.issn.1000-8365.2007.03.033

2007-01-01

Abstract:The sources and characteristics of theoretical machining errors for an undevelopable ruled surface model in flank milling are analyzed,and a new algorithm is proposed to determine the error distribution by computing the distance between the points of the ruled surface and the cutter axis swept surface,which provides an important basis for initiative compensating of the cutter positions and farther machining.The distance between a point and a surface is obtained through subdivision and substitutive planes,and the efficiency is improved by determining the minimum subdivision number of a surface depending on the precision requirement.A complex surface is substituted by planes,in order to simplify the case to the computation of distance between a point and a substituted plane,which can be calculated accurately.The reliability of the algorithm is verified by comparing with the 3 coordinates measured result.
Cutting 3D parts with 2D curve program in WEDM

郭艳玲,赵万生

DOI: https://doi.org/10.3321/j.issn:1000-8608.2001.03.016

2001-01-01

Abstract:This paper classifies the parts which can be machined by WEDM (wire electric discharge machine), analyzes the structural characteristics of each type of the parts, gives the different cutting strategy to cylinder, conical surface, cone and abnormity, summarizes two steps of programming cutting program for parts consisting of straight lines, brings forward a specific method which cuts a complex three-dimensional part with a simple two-dimensional curve program-direct interpolation; It needn't linearize the cutting trail, and it can raise the cutting precision and predigest program work.
An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting

Zhi Chen,Yu Huang,Zhen Zhang,He Li,Wu yi Ming,Guojun Zhang

DOI: https://doi.org/10.1007/s00170-014-6002-5

IF: 3.563

2014-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:Wire electrical discharge machining (WEDM) has occupied an important position in some high-precision and high-performance manufacturing industries due to its capability of accurate and efficient machining parts with varying hardness or complex shapes. However, the high-machining precision and efficiency, especially at rough corner cutting, cannot be satisfied simultaneously because of some phenomena such as wire rupture, deflection, vibration, etc. This paper aims to analyze and reduce the geometrical inaccuracy of rough corner cutting; first of all, the major causes of corner inaccuracy (45°, 90°, and 135° angle) are analyzed in detail. Secondly, an elliptic fitting method is proposed to describe the trajectory of wire electrode center, and the feasibility of model is confirmed by measuring the corner edge of workpiece. Moreover, three sets of Taguchi experiments (L 2737) are designed to investigate the main effect and influence trends of control factors on corner error. Eventually, some optimized control factor combinations are sought by generalized non-linear regression model. As a result of confirmatory experiments, more than 50 % decrease of corner error has been achieved at 5 mm/min cutting feedrate (a high-cutting feedrate of the machine tool used in this study) by the optimized control factors combination in rough corner cutting.
Compensation of electrode orbiting in electrical discharge machining based on non-uniform offsetting

Gang Wang,Yan Shan

DOI: https://doi.org/10.1016/j.ijmachtools.2005.01.023

IF: 10.331

2006-01-01

International Journal of Machine Tools and Manufacture

Abstract:In orbiting EDM, the orbital motion of electrode makes the cavity dimension in the workpiece deviate from the design objective. This paper presents a compensation method for electrode orbiting. The presented techniques are used to modify the geometric shape of free-form electrode, so as to eliminate the effects to the cavity dimension that arise from the electrode orbiting. The basic approach consists of three steps: (1) NURBS parameters extraction of electrode surfaces and surface adaptive sampling; (2) non-uniform offsetting of the sampled points according to the orbiting patterns; (3) approximation of non-uniform offset surface under error control. And the method to handle trimmed surface in compensation is also discussed. Quite a few implemented examples and machining results show that the developed techniques can compensate the orbital motion and improve the machining precision effectively.
Non-circular parametric curve and curved surface interpolation and tool compensation for WEDM based on unit arc length increment method

Hao Chen,Wan-Sheng Zhao,Xue-Cheng Xi,Mo Chen,Wei Liang

DOI: https://doi.org/10.1007/s00170-016-8851-6

IF: 3.563

2016-05-11

The International Journal of Advanced Manufacturing Technology

Abstract:This paper proposes a novel non-circular parametric curve interpolation algorithm based on the unit arc length increment method (UALI). In this method, axial coordinates are taken as functions of arc length. The reference point moves by 1 basic length unit (BLU) along a curve in each interpolation period, and the corresponding projections on each coordinate are added into accumulators of each axis respectively. An axis will then move by 1 BLU when its accumulator exceeds 1 BLU. Theoretically, based on the UALI method, an interpolation algorithm is derived for parametric curves such as involutes, Archimedes spirals, cycloids, and parabolas. This interpolation algorithm is applicable for ruled surfaces of a workpiece with different parametric curves in the upper and lower planes. Tool compensation is considered for both non-tapered workpieces as well as tapered workpieces. Simulation results and experiment results demonstrate the advantages of this interpolation algorithm, and the accuracy of this interpolation algorithm is analyzed.

Ellipse-offset method for calculating the offset curve of ruled surface in WEDM

A 3D Curve Offset Approach for Ruled Surface Generation in Engineering Design

An Improved Method of Tool Offsetting for Free Curve

Smoothing the Extrapolation of Four-Axis Simultaneous Control in Ruled Surface WEDM

Processing Method of Spatial Complicated Curved Surface of High-speed WEDM

The Study of Taper Programming System of LS-WEDM

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

CAD/CAM software for manufacturing 3-D curved surfaces using WEDM

Simulation Software Development for Curved Surface Machining by WEDM Based on Pro/ENGINEER

Helical Surface Creation by Wire Electrical Discharge Machining for Micro Tools

Modeling and Simulation of Wire Electrode Deflection in WEDM

Gap status identification and control of wire electrochemical micromachining

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Positioning Algorithm for 5-Axis Machining of Ruled Surfaces Based on Radius and Angle Offset

Calculation of Cutter-location and Error Analysis in Numerical Control Flank Milling of Twisted Ruled Surface Impeller

Algorithm for Calculating Theoretical Errors of Undevelopable Ruled Surface Model in Flank Milling

Cutting 3D parts with 2D curve program in WEDM

An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting

Compensation of electrode orbiting in electrical discharge machining based on non-uniform offsetting

Non-circular parametric curve and curved surface interpolation and tool compensation for WEDM based on unit arc length increment method