Abstract:Continuous linear commands are widely executed in computer numerical control (CNC) machining. The tangential discontinuity at the junction of consecutive segments restricts the machining efficiency and deteriorates the surface quality. Corners of linear segments have been successfully blended by inserting parametric splines. There still exists challenges when the common methods are employed in the line-segment commands due to part of the following restrictions: (1) the stringent computation for iteratively calculating the arc-length; (2) the unwanted feedrate fluctuation; (3) the oversize contour deviation for separately completing curve fitting and velocity planning. A novel smoothing method based on a clothoid pair to synchronously accomplish planning of geometry blending and speed scheduling is proposed, the spline parameter of which is arc-length-parameterized. The arc-length, curvature extreme, and geometric shape of the transition curve are analytically expressed by the transition length. On these bases, the transition curve and the velocity profile are concurrently constructed based on the predefined approximation error, the reachable velocity, and normal kinematic constraints in the look-ahead stage. Then, a real-time interpolation scheduling is developed to overcome the crossing difficulties between the linear and parametric segments. Compared with existing methods, the proposed method can analytically calculate the length of transition curves for the arc-length-parameterized expression form. Furthermore, the feedrate fluctuation is eliminated in the fine interpolation. Moreover, the overlarge contour derivation produced by corner smoothing is significantly avoided. It is friendlier to the CNC system for the on-line executing smooth motion since more computing resources can be released to handle other tasks, smoother motion can be achieved and higher contour accuracy can be obtained. The experimental results also demonstrate its practicability and reliability.

Smoothing the Extrapolation of Four-Axis Simultaneous Control in Ruled Surface WEDM

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Extended Unit Arc Length Increment Interpolation for Generalized NURBS Curves in Multi-Axis EDM

Simulation of Cutting Space Surfaces During Five-Axes WEDM

Trajectory Planning For The Four Axis Wedm Machine Tool And Its Implementation

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Systematic Modeling and Rapid Control for Diamond Machining of Periodical Optical Surface

Kinematic Modeling and Error Analysis of Cradle-type WEDM

CAD/CAM software for manufacturing 3-D curved surfaces using WEDM

Simplification of a G-Code Feeding Path in Roughing Multi-Axis Electrical Discharging Machining for Shrouded Blisks with a Contour Error Constraint

An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting

A Newly Developed Corner Smoothing Methodology Based on Clothoid Splines for High Speed Machine Tools

Real-time Estimate and Control Contour Errors for Five-Axis Local Smoothed Toolpaths Based on Airthoid Splines

Generalized Unit Arc Length Increment Method for Six-axis Electro-discharge Machining

Processing Method of Spatial Complicated Curved Surface of High-speed WEDM

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

A Novel Trajectory Interpolation Algorithm for WEDM - Unit Generalized Arc Length Increment Method

An integrated trajectory smoothing method for lines and arcs mixed toolpath based on motion overlapping strategy

Spline Interpolation Controller with Fairing Function for Five-Axis Machining

Local asymmetrical corner trajectory smoothing with bidirectional planning and adjusting algorithm for CNC machining