Abstract:In the end milling of superalloy honeycomb cores, the contact form between the cutting tool and honeycomb wall and the force state of the honeycomb wall are variable, there will be difficulties in chip removal. The irregular extension of transverse tearing burrs can deteriorate the machining quality of honeycomb core surfaces, thereby adversely affecting the assembly and service performance of sandwich structures. Based on kinematic analysis, modeling of the removal and deflection process of honeycomb walls was conducted. The feed entrance angle in the case of machining thin walls with high feed speeds was characterized, and the force state of the honeycomb wall and the degree of shear or compression it bears were analyzed. Analytical models of damage scale and single-tooth cutting state were established under different feed entrance angles. The impact of feed entrance angle on the minimum burr length and the minimum constraint failure width was analyzed. The milling experiments of GH4099 superalloy honeycomb wall with ice filling constraint were designed and conducted to clarify the influence of different feed entrance angles on cutting force and transverse tearing burr length. The morphology of burrs and the wear form of the cutting tool were analyzed, and the formation mechanism of transverse tearing burr on the honeycomb sidewalls was revealed. The research results indicate that the feed force F x is 2.1 to 4.7 times greater than the main force F y or the back force F z . When the feed entrance angle is less than 90°, transverse tearing burrs either do not occur, or occur crimped burrs that are gradually removed. Particularly within the range of 0° to 30°, the machining quality is better. The cutting force has a significant shearing effect on the honeycomb wall, making it susceptible to plastic deformation and reaching the fracture strain. The cutting edge can effectively remove material from the honeycomb wall, resulting in normal wear on the minor flank face and tip of the cutting tool. When the feed entrance angle is greater than 90°, it is easy to form large banded burrs, and the burr length is relatively similar to about 1500μm. The cutting force has a significant extrusion effect on the honeycomb wall, resulting in minimal deflection deformation of the honeycomb wall, and making it difficult to fracture. The cutting tool fails to perform effective cutting, leading to increased friction between the cutting tool and honeycomb wall, which continuously induces irregular extension of the burrs. The research findings are of great significance for achieving damage control in metal honeycomb core machining and guiding process and clamping optimization.

Experimental Research on Processing Honeycomb Material Technology with Ice Fixation

Principle and effectiveness of ice fixation clamping in the milling of GH4099 superalloy honeycomb core

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

A New Machining Technique for Cutting NOMEX Honeycomb Core

Study on Method of Modularization Fixation for Paper Honeycomb Core

Fixing System Design of Paper Honeycomb Core for High Speed Milling

Optimization of High-speed Milling Prosess for NOMEX Honeycomb

Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core

Machining damage mechanism in end milling of the GH4099 superalloy honeycomb core with ice fixation

Study on Paper Honeycomb Position Fixation Method

Modelling of the Temperature Distribution Based on Equivalent Heat Transfer Theory and Anisotropic Characteristics of Honeycomb Core During Milling of Aluminum Honeycomb Core

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

Influence of feed entrance angle on transverse tearing burr formation in the milling of superalloy honeycomb with ice filling constraint

Study on the Cutting Force in Machining of Aluminum Honeycomb Core Material

Performance Enhancement of Sandwich Panels with Honeycomb–corrugation Hybrid Core

Crushing Response and Optimization of a Modified 3D Re-Entrant Honeycomb

The study of honeycomb material dynamic mechanical properties which under out-plane impact load

The Variation Mechanism of Core Pressure and Its Influence on the Surface Quality of Honeycomb Sandwich Composite with Thin Facesheets

Fabrication of aluminum alloy honeycomb panels by vacuum brazing and heat treatment strengthening technology

Crushing performance of a novel tetra-missing rib honeycomb: Experimental and numerical studies