Abstract:The honeycomb sandwich structure has been widely used in the aerospace industry due to its high specific strength and stiffness. However, the machining defects of the aluminum honeycomb core (AHC) have become the key factor that restricts its application. In this paper, the defects' characteristics including the formation mechanism, distribution characteristic, and cutting process of honeycomb cell walls during AHC milling process were experimentally investigated. Furthermore, using normalized Cockcroft and Latham ductile fracture criterion and Johnson–Cook (JC) constitutive model, the numerical simulation of the AHC machining process was conducted concerning the entrance angle. It is indicated that six categories of milling defects are obtained and the quantity as well as distribution regularity of AHC milling defects are determined by the double effects of both the entrance angle and cutting force. Most of the surface defects of honeycomb materials were found concentrated in three regions, named by zones I–III, in which extruding, shear, and tensile deformation was mainly generated, respectively. Besides, the finite element simulation results also agree well with the experimental findings. Finally, a novel optimization method to avoid defects in the aforementioned regions by controlling the entrance angle of all the honeycomb walls during the cutting process was proposed in this paper. Meanwhile, the optimal control equations of the entrance angle for all cell walls were derived. This method was verified by milling experiments at last and the results showed that the optimization effect was obvious since the quality of the machined surface was greatly improved.

Fixing System Design of Paper Honeycomb Core for High Speed Milling

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

Study on Method of Modularization Fixation for Paper Honeycomb Core

Optimization of High-speed Milling Prosess for NOMEX Honeycomb

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Attractive Fixture System Based on Magnetic Field and Friction Force for Numerically Controlled Machining of Paper Honeycomb Core

Study on Paper Honeycomb Position Fixation Method

Automated fixture system for high speed milling of paper honeycomb core

Design of Compacting and Iron Powder Filling Device in Paper Honeycomb Parts Clamping System

A New Machining Technique for Cutting NOMEX Honeycomb Core

Separating mechanism design for iron powder and paper scraps based on magnetic force

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Study on rudder clamping method of paper honeycomb

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

A Helical Milling and Oval Countersinking End-Effector for Aircraft Assembly

Principle and effectiveness of ice fixation clamping in the milling of GH4099 superalloy honeycomb core

Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core

Research on a Planning Method for Switching Moments in Hybrid Manufacturing Processes

Machining damage mechanism in end milling of the GH4099 superalloy honeycomb core with ice fixation