Abstract:The honeycomb sandwich structure has been widely used in the aerospace industry due to its high specific strength and stiffness. However, the machining defects of the aluminum honeycomb core (AHC) have become the key factor that restricts its application. In this paper, the defects' characteristics including the formation mechanism, distribution characteristic, and cutting process of honeycomb cell walls during AHC milling process were experimentally investigated. Furthermore, using normalized Cockcroft and Latham ductile fracture criterion and Johnson–Cook (JC) constitutive model, the numerical simulation of the AHC machining process was conducted concerning the entrance angle. It is indicated that six categories of milling defects are obtained and the quantity as well as distribution regularity of AHC milling defects are determined by the double effects of both the entrance angle and cutting force. Most of the surface defects of honeycomb materials were found concentrated in three regions, named by zones I–III, in which extruding, shear, and tensile deformation was mainly generated, respectively. Besides, the finite element simulation results also agree well with the experimental findings. Finally, a novel optimization method to avoid defects in the aforementioned regions by controlling the entrance angle of all the honeycomb walls during the cutting process was proposed in this paper. Meanwhile, the optimal control equations of the entrance angle for all cell walls were derived. This method was verified by milling experiments at last and the results showed that the optimization effect was obvious since the quality of the machined surface was greatly improved.

Study on Paper Honeycomb Position Fixation Method

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

Study on Method of Modularization Fixation for Paper Honeycomb Core

Fixing System Design of Paper Honeycomb Core for High Speed Milling

Attractive Fixture System Based on Magnetic Field and Friction Force for Numerically Controlled Machining of Paper Honeycomb Core

Design of Compacting and Iron Powder Filling Device in Paper Honeycomb Parts Clamping System

Optimization of High-speed Milling Prosess for NOMEX Honeycomb

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Study on rudder clamping method of paper honeycomb

Automated fixture system for high speed milling of paper honeycomb core

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

Separating mechanism design for iron powder and paper scraps based on magnetic force

A New Machining Technique for Cutting NOMEX Honeycomb Core

Principle and effectiveness of ice fixation clamping in the milling of GH4099 superalloy honeycomb core

Automatic Material Pouring Technics in Paper Honeycomb Parts Using an Industrial Robot

The Variation Mechanism of Core Pressure and Its Influence on the Surface Quality of Honeycomb Sandwich Composite with Thin Facesheets

Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core

Research on Filling Repair for Honeycomb Sandwich Structures

Research on Dynamic Response under the External Impact of Paper Honeycomb Sandwich Board

Improved design of 3D printed star honeycomb pressure resistance and sandwich panel protective capability

A meso-mechanics-based experimental method for characterizing the in-plane compressive properties of aramid paper