Abstract:Currently, workers in sand casting face harsh environments and the operation safety is poor. Existing pouring robots have insufficient stability and load-bearing capacity and cannot perform intelligent pouring according to the demand of pouring process. In this paper, a hybrid pouring robot is proposed to solve these limitations, and a vision-based hardware-in-the-loop (HIL) control technology is designed to achieve the real-time control problems of simulated pouring and pouring process. Firstly, based on the pouring mechanism and the motion demand of ladle, a hybrid pouring robot with a 2UPR-2RPU parallel mechanism as the main body is designed. And the equivalent hybrid kinematic model was established by using Eulerian method and differential motion. Subsequently, a motion control strategy based on HIL simulation technique was designed and presented. The working space of the robot was obtained through simulation experiments to meet the usage requirements. And the stability of the robot was tested through the key motion parameters of the robot joints. Based on the analysis of pouring quality and trajectory, optimal dynamic parameters for the experimental prototype are obtained through water simulation experiments, the pouring liquid height area is 35–40 cm, the average flow rate of pouring liquid is 112 cm 3 /s, and the ladle tilting speed is 0.0182 rad/s. Experimental results validate the reasonableness of the designed pouring robot structure. Its control system realizes the coordinated movement of each branch chain to complete the pouring tasks with different variable parameters. Consequently, the designed pouring robot will significantly enhance the automation level of the casting industry.

Automatic Material Pouring Technics in Paper Honeycomb Parts Using an Industrial Robot

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

Study on Clamping Method for Paper Honeycomb Based on Magnetic Field and Friction Principle

Study on Method of Modularization Fixation for Paper Honeycomb Core

Study on Offline Programming of Industrial Robot for Cutting Process

Design of Compacting and Iron Powder Filling Device in Paper Honeycomb Parts Clamping System

Study on Paper Honeycomb Position Fixation Method

Study on Robot Automatic Drilling of Carbon Fiber Reinforced Plastics (CFRP)

Attractive Fixture System Based on Magnetic Field and Friction Force for Numerically Controlled Machining of Paper Honeycomb Core

Fixing System Design of Paper Honeycomb Core for High Speed Milling

Design, simulation, control of a hybrid pouring robot: enhancing automation level in the foundry industry

An off-line programming system for robotic drilling in aerospace manufacturing

Processing research of industry robots drilling and countersinking automaticly

Automated fixture system for high speed milling of paper honeycomb core

Experimental Study of Automatic Rivet Feeding System of Robot Automatic Drilling & Riveting

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology

Study on Automatic Control System of Sealing Machine for Metallic Fuel Tank

Structural Potting of Large Aeronautic Honeycomb Panels: End-Effector Design and Test for Automated Manufacturing

Research on the automatic programming system for industrial robots in free-form surfaces polishing

An Intelligent Robotic System for Perceptive Pancake Batter Stirring and Precise Pouring