Polymer-encapsulated Hydrophilic Carbon Black Nanoparticles

Li Hanying,CHEN Hongzheng,Xu Wenjun,Yuan Fang,WANG Mang

DOI: https://doi.org/10.3321/j.issn:0254-3087.2004.z2.016

2004-01-01

Abstract:It reported a simple method of coacervation by which carbon black nanoparticles were encapsulated by poly vinyl alcohol or poly acrylamide. This strategy avoids the complicated polymerization process involved in the counterpart of polymer-coating approaches

What problem does this paper attempt to address?

Polymer-encapsulated Hydrophilic Carbon Black Nanoparticles Free from Aggregation

HY Li,HZ Chen,WJ Xu,F Yuan,JR Wang,M Wang

DOI: https://doi.org/10.1016/j.colsurfa.2004.12.002

IF: 5.518

2005-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Poly(vinyl alcohol) (PVA) with high hydrolysis degree and poly(acrylamide) (PAM) was selected to encapsulate carbon black (CB) nanoparticles via a simple method of coacervation. Transmission electron microscopy (TEM) images clearly demonstrated that the Successful encapsulation of the two polymers happened at the surfaces of CB nanoparticles. The particle size distribution measurements indicated that the majority of the obtained polymer-encapsulated CB (CB@polymer) nanoparticles has the nanoscale dimension, and that PVA is more suitable to prepare hydrophilic CB@polymer nanoparticles than PAM. The effect of the nonsolvent of PVA and the shear force during the encapsulation on the size of CB nanoparticles was discussed in detail. (C) 2004 Elsevier B.V All rights reserved.
Poly(vinyl Alcohol)‐encapsulated Hydrophilic Carbon Black Nanoparticles Free from Aggregation

HY Li,HZ Chen,JZ Sun,J Cao,ZL Yang,M Wang

DOI: https://doi.org/10.1002/marc.200350017

IF: 5.006

2003-01-01

Macromolecular Rapid Communications

Abstract:Carbon black (CB) nanoparticles were encapsulated by poly(vinyl alcohol) (PVA) by a simple method of coarcervation. Transmission electron microscopy (TEM) images clearly demonstrated that the successful encapsulation of PVA happened at the surfaces of CB nanoparticles. The particle-size distribution measurements indicated that the diameters of the obtained PVA-encapsulated CB (CB@PVA) nanoparticles were distributed within the nanoscale dimension. This strategy avoids the complicated polymerization process involved in the counterpart of polymer-coating approaches.
Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

YW Luo,XD Zhou

DOI: https://doi.org/10.1002/pola.20065

2004-01-01

Abstract:The nanoencapsulation of hydrophobic compounds by miniemulsion polymerization, a convenient one-step encapsulation technique for nanocapsules, was investigated in terms of the thermodynamics and kinetics. The encapsulation was achieved by polymerization inducing phase separation within minidroplets dispersed in an aqueous phase. Thermodynamic factors (the level and type of surfactant, the level of the hydrophilic comonomer, and the monomer/paraffin ratio), kinetic factors (the level of the crosslinking agent or chain-transfer agent), and nucleation modes were all found to have a great influence on the latex morphology. Specifically, for a styrene/paraffin system, there were optimum levels of sodium dodecyl sulfate (1.0 wt %), the hydrophilic comonomer (1.0 wt % methyl acrylate acid), and the chain-transfer agent (0.2 wt % n-dodecanethiol) for obtaining well-defined nanocapsules of paraffin with a styrene/paraffin ratio of 1:1. When the styrene/paraffin ratio was reduced, however, it was more difficult to achieve a fully encapsulated particle morphology. Homogeneous nucleation could compete with encapsulation, and this resulted in a pure polymer particle and a half-moon morphology. Conditions were also found under which complete encapsulation could be observed with a water-soluble initiator (potassium persulfate), contrary to certain reports. Replacing potassium persulfate with an oil-soluble initiator (2,2-azo-bisisobutyronitrile) had little influence on the morphology under those conditions. (C) 2004 Wiley Periodicals, Inc.
Heterocoagulation Behavior of Carbon Black with Surface Encapsulation Through Emulsion Polymerization

Lili Jiang,Wenqi Wang,Aiguo Guan,Guozhang Wu

DOI: https://doi.org/10.1002/app.43516

IF: 3

2016-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTNanocomposite microspheres containing styrene–acrylate resin, wax, and carbon black (CB) with desired CB dispersion were prepared through heterocoagulation. The CB surface was modified using conventional anionic emulsifier and anionic dispersants with different lengths of nonionic chains and reactivities or through polymer encapsulation via emulsion polymerization to regulate the dispersion and concentration of CB in the microspheres. Experimental results showed that anionic dispersants with long nonionic chains effectively dispersed and stabilized CB particles. Polystyrene (PS) was then encapsulated on the CB surface by using a reactive dispersant and a water‐soluble initiator of polymerization. The CB particles exhibited comparable pH stability with other heterocoagulation components. Overall, encapsulation through emulsion polymerization can be used to obtain not only high CB content but also improved CB distribution in the resulting microspheres. High coagulation efficiency can also be achieved using polystyrene‐encapsulated dispersed CB because of its high affinity to emulsifiers and reactive dispersants during dispersion. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43516.
Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

LIU Wen-fang,GUO Zhao-xia,YU Jian

DOI: https://doi.org/10.3321/j.issn:1000-7555.2009.01.019

2009-01-01

Abstract:Nanometer calcium carbonate has important applications in the field of polymer modification.However,its hydrophilic nature leads to poor compatibility with polymer,for which,surface modification is often necessary.In this study,nanometer calcium carbonate was encapsulated with carboxyl styrene-butadiene rubber latex or carboxyl terminated polybutadiene by direct mixing with the dilution of polymer.Obtained particles were characterized by Soxhlet extraction,FT-IR,TEM and sedimentation experiment.The results show that the encapsulation of either polymer on the surface of nanometer calcium carbonate was successfully achieved.Optimum loading amount of polymer is 13%,corresponding to encapsulation ratio of 11% and 6.8%,and encapsulation efficiency of 85% and 52%,respectively.After the encapsulation,the shape of nanometer calcium carbonate particles changes from polyhedral to approximately round.Surface character of particles becomes from hydrophilic to hydrophobic,and the dispersibility of particles in hydrophobic solvent gets improved.
Preparation of Polymer–nanoparticle Composite Beads by a Nanoparticle-Stabilised Suspension Polymerisation

Tom Hasell,Jixin Yang,Wenxin Wang,Jun Li,Paul D. Brown,Martyn Poliakoff,Edward Lester,Steven M. Howdle

DOI: https://doi.org/10.1039/b705917e

2007-01-01

Journal of Materials Chemistry

Abstract:A novel strategy based on nanoparticle-stabilised suspension-polymerisation has been achieved for the preparation of hybrid nanocomposites in the absence of any conventional stabiliser. By using this in situ polymerisation technique, functional nanoparticles can be immobilised onto the surface of polymer beads to significantly modify their properties. In this paper, Fe3O4 nanoparticles are used as stabiliser for the suspension polymerisation of methyl methacrylate (MMA) in water. Magnetic Fe3O4–PMMA nanocomposite polymer particles have been successfully synthesised. The experimental results show that the Fe3O4 nanoparticles are uniformly distributed on the surface of the spherical polymer beads.
Preparation of Hybrid Polymer Nanocomposite Microparticles by a Nanoparticle Stabilised Dispersion Polymerisation

Jixin Yang,Tom Hasell,Wenxin Wang,Jun Li,Paul D. Brown,Martyn Poliakoff,Edward Lester,Steven M. Howdle

DOI: https://doi.org/10.1039/b715927g

2008-01-01

Journal of Materials Chemistry

Abstract:We report the use of nanoparticles to stabilise free radical dispersion polymerisations, without the need for any conventional stabiliser, leading to the preparation of polystyrene nanocomposites. The products are well characterised spherical polymer microparticles decorated with nanoparticles on their surfaces. In this paper we demonstrate the process with Fe3O4nanoparticles yielding a product with a strong magnetic property. By using this in situpolymerisation technique, not only can nanoparticles in aqueous solution be harvested, but also this provides a completely new route to polymer composites. Thus, functional nanoparticles can be immobilised onto the surface of the polymer beads to modify significantly their properties.
Fabrication of carbon black/crosslinked poly(vinyl pyrrolidone) core-shell nanoparticles stable in water

Wenjun Xu,Hongzheng Chen,Hanying Li,Mang Wang

DOI: https://doi.org/10.1016/j.colsurfa.2005.05.072

2005-01-01

Abstract:Colloidal nanoparticles consisting of oxidized carbon black (CB) coated by poly(vinyl pyrrolindone) (PVP) were fabricated by a simple phase separation method. The morphology of the CB/PVP composite nanoparticles demonstrated by transmission electron microscopy (TEM) indicated a core-shell structure for the composite. Crosslinking reaction was undertaken to tighten the contact between the PVP shell and the CB core, which made the nanocomposite much more stable in water. The particle size distribution for the nanoparticles was narrow with the mean diameter of 62nm. The effects of two principle parameters, which are the amount of nonsolvent for PVP and the crosslinking initiator, were also investigated.
Fabrication of Amphiphilic Porous PDVB-PAA Janus Nanoparticles: Formation Mechanism, Simultaneous Loading and Regulated Release of Hydrophobic and Hydrophilic Cargos

Weiming Ji,Huan Fu,Shunni Dong,Shaoxiong Zhu,Wei Fan,Jingjing Nie,Xinghong Zhang,Binyang Du

DOI: https://doi.org/10.1016/j.colsurfa.2022.128665

IF: 5.518

2022-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:In this work, we reported the amphiphilic porous polydivinylbenzene-poly(acrylic acid) (PDVB-PAA) Janus nanoparticles (NPs) with a cross-linked hydrophobic porous PDVB framework and a cross-linked hydrophilic porous PAA bulge, which were converted from polystyrene/polydivinylbenzene-poly(tert-butyl acrylate) (PS/ PDVB-PtBA) Janus NPs via hydrolysis in dichloromethane. Cl,Br-labeled PS/PDVB-PtBA Janus NPs were designed and synthesized to experimentally verify the formation mechanism of PS/PDVB-PtBA Janus NPs and PDVB-PAA Janus NPs for the first time by combined techniques of TEM, SEM with element mapping and FTIR measurements. By simply varying the feeding amount of crosslinking agent ethylene glycol dimethacrylate (EGDMA) during the polymerization step of tBA, the morphologies of resultant PS/PDVB-PtBA Janus NPs and corresponding PDVB-PAA Janus NPs could be well controlled. It was demonstrated that the obtained amphiphilic porous PDVB-PAA Janus NPs could be applied as carrier materials for simultaneously loading hydrophobic coumarin 153 and hydrophilic rhodamine 6G.
Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

XU Hao,BAO Yong-zhong,HUANG Zhi-ming,WENG Zhi-xue

DOI: https://doi.org/10.3785/j.issn.1008-973x.2005.12.005

2005-01-01

Abstract:To improve the stability of suspension swelling graft copolymerization of acrylonitrile-chlorinated polyethylene-styrene(AN-CPE-St) and to prepare AN-CPE-St copolymers with suitable particle characteristics,the function of polyvinyl alcohol/hydroxyapatite(PVA/HAP) composite suspending agents in the suspension copolymerization was investigated.The particle features of the obtained copolymers and the distribution of suspending agents in the copolymer particles were characterized and the dispersion and stabilization function of composite suspending agents were illustrated.The results show that the agglomeration of copolymer particles occurs in the polymerization when PVA or HAP is used individually.Copolymer particles have regular shape when PVA/HAP composite suspending agents with mass ratio of(1.0∶2.2) are applied.The average size of copolymer particles decreases and the content of fine AN-St copolymer particles increases with the increasing mass fraction of the composite suspending agents.After adopting PVA/HAP composite suspending agents,the two-layer protective films formed at the surface of the dispersed oil phase can provide colloidal protection and mechanical isolation to the oil phase.
Synthesis of Polymeric Nanocapsules with a Crosslinked Shell Through Interfacial Miniemulsion Polymerization

Zhihai Cao,Guorong Shan

DOI: https://doi.org/10.1002/pola.23255

2009-01-01

Journal of Polymer Science Part A Polymer Chemistry

Abstract:AbstractA water‐soluble comonomer, N‐isopropylacrylamide (NIPAM), and an oil‐soluble crosslinker, divinylbenzene (DVB), have been combined in a system for the synthesis of nanocapsules with crosslinked shells through interfacial miniemulsion polymerization by encapsulating a liquid nonsolvating hydrocarbon. Oligomers of poly(N‐isopropylacrylamide) (PNIPAM) were dehydrated and separated from the aqueous phase and were adsorbed by the nanodroplets or latex particles and then anchored at their interfaces by means of a crosslinking reaction. Nanocapsules were then formed through encapsulation of the hydrocarbon by the newly produced polymers at the interfaces of the droplets. The crosslinked structure gradually grew to stabilize the shell morphology. The incorporation of NIPAM into the shell copolymers has been verified by FTIR and solid‐state 13C NMR data. The fact that the number of nanocapsules increases with increasing amounts of DVB and NIPAM supports the formation of nanocapsules following interfacial (co)polymerization. Therefore, a mechanism for the formation of nanocapsules through interfacial (co)polymerization induced by NIPAM and DVB is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1522–1534, 2009
Facile synthesis of nanocapsules and hollow nanoparticles consisting of fluorinated polymer shells by interfacial RAFT miniemulsion polymerization

Hao Chen,Yingwu Luo

DOI: https://doi.org/10.1002/macp.201000664

IF: 2.996

2011-01-01

Macromolecular Chemistry and Physics

Abstract:Nanocapsules made of a cross-linked poly(dodecafluoroheptyl acrylate) shell were successfully synthesized by interfacial RAFT miniemulsion polymerization. The well-defined hollow fluorinated polymer structures were obtained by the subsequent removal of the liquid core materials. The core/shell ratio could be easily tuned up to 1:1 by changing the conditions. In the cases of high core/shell ratio of 1:2 and 1:1, the nanocapsules were severely deformed, which was improved by increasing the cross-linker amount up to 30 wt.-%. It was concluded that the utility of the interfacial RAFT miniemulsion polymerization overcame the thermodynamic and kinetic barriers in a conventional miniemulsion polymerization.
Preparation of Hydrophilic Encapsulated Carbon Nanotubes with Polymer Brushes and Its Application in Composite Hydrogels.

Zili Li,Miao Tang,Wei Bai,Ruke Bai

DOI: https://doi.org/10.1021/acs.langmuir.7b00972

IF: 3.9

2017-01-01

Langmuir

Abstract:Carbon nanotubes can be used as promising reinforcement materials to improve the mechanical properties of hydrogels, but their poor dispersibility in aqueous solution severely limits their application in preparation of composite hydrogels. Therefore, to develop method for modification of carbon nanotubes is still highly desired. In this paper, a facile approach for preparation of the hydrophilic carbon nanotube was reported. The encapsulated multiwalled carbon nanotubes (E-CNT-PAA) with cross-linked shell structure were obatined through the self-assembly of the amphipathic azide diblock copolymers poly(acrylic acid)-b-poly(4-vinylbenzyl azide-co-styrene) (PAA-b-(PVBA-co-PS)), and the cross-linking of inside azide groups under UV irradiation. The encapsulated MWCNT was characterized by FT-IR, Raman and TEM. It was demonstrated that the dispersibility of the hydrophilic encapsulated MWCNTs was related to the length of the poly(acrylic acid) brushes. Subsequently, thermal-responsive composite hydrogels (PNIPAM/E-CNT-PAA) were prepared by in situ polymerization of N-isopropylacrylamide (NIPAM) in the solution of dispersed E-CNT-PAA. The results showed that the composite hydrogels possessed high mechanical properties compared to the pure PNIPAM hydrogel. The tensile strength and elongation of the composite hydrogels were highly dependent on the content of the modified MWCNTs. The composite hydrogels with 0.46 wt % MWCNTs exhibited tensile strength of 97.7 kPa and elongation of 465%, which were at least 3.5× higher than those of the PNIPAM hydrogel. Moreover, the composite hydrogels displayed significant and reversible stimuli-responsiveness.
Encapsulation of Nanometer Caco3 by Polymer Network

WF Liu,ZX Guo,J Yu

DOI: https://doi.org/10.4028/www.scientific.net/msf.475-479.1005

2005-01-01

Materials Science Forum

Abstract:Stearic acid coated nanometer CaCO3 was encapsulated by polystyrene (PS) network via emulsion polymerization, where a polyfunctional monomer trimethyol propane trimethacrylate (TMPTMA) or divinyl benzene (DVB) was used as crosslinker. The feed modes of monomer and initiator are investigated. Batch mode is shown to be more convenient than semi-continuous mode in view of network perfection. With the amount of crosslinkers increased from 1 wt% to 7 wt%, the percentage of unextractable PS is high (not lower than 95%) for all samples in the system of TMPTMA, while this value decreases sharply from 74% to 3% in the system of DVB. The yield in the system of DVB is higher than that of TMPTMA. With increased amount of CaCO3, encapsulation ratio can be varied from 5.2 to 2.6, while the yield and unextractable PS decrease. FT-IR spectra of the products after extraction indicate tight encapsulation between PS and CaCO3, and TEM photographs of composite particles give direct evidence of encapsulation.
Encapsulation of Nanometer CaCO<sub>3</sub> by Polymer Network

Wen Fang Liu,Zhao Xia Guo,Jian Yu

DOI: https://doi.org/10.4028/www.scientific.net/msf.475-479.1005

2005-01-01

Materials Science Forum

Abstract:Stearic acid coated nanometer CaCO3 was encapsulated by polystyrene (PS) network via emulsion polymerization, where a polyfunctional monomer trimethyol propane trimethacrylate (TMPTMA) or divinyl benzene (DVB) was used as crosslinker. The feed modes of monomer and initiator are investigated. Batch mode is shown to be more convenient than semi-continuous mode in view of network perfection. With the amount of crosslinkers increased from 1 wt% to 7 wt%, the percentage of unextractable PS is high (not lower than 95%) for all samples in the system of TMPTMA, while this value decreases sharply from 74% to 3% in the system of DVB. The yield in the system of DVB is higher than that of TMPTMA. With increased amount of CaCO3, encapsulation ratio can be varied from 5.2 to 2.6, while the yield and unextractable PS decrease. FT-IR spectra of the products after extraction indicate tight encapsulation between PS and CaCO3, and TEM photographs of composite particles give direct evidence of encapsulation.
Encapsulation of Surface-Modified Carbon Blacks by Poly(sodium-P-styrenesulfonate) Via a Phase Separation Method

Shenbo Jin,Qiuying Li,Chifei Wu

DOI: https://doi.org/10.1016/j.powtec.2015.04.011

IF: 5.64

2015-01-01

Powder Technology

Abstract:Carbon black (CB) encapsulated by poly(sodium-p-styrenesulfonate) (PSS) via a strong π–π interaction was prepared with the use of ethyl alcohol by a simple phase separation method. Surface treatment was carried out to provide CB particles a better dispersity in water before encapsulation. The result of Fourier transform infrared spectroscopy demonstrated the existence of PSS chains on the surface of coated CB. A nanoparticle with a core/shell structure was clearly observed by transmission electron microscope, while the Raman spectroscopy consequence displayed a structure change of CB after encapsulation. The result of thermal gravimetric analysis indicated that the particle size of CB and the introduction of ethyl alcohol during the experiment are of great importance to prepare hydrophilic carbon black with high encapsulation ratio. Compared to pristine CB, the encapsulated CB exhibited a superb stability in aqueous medium according to the consequence of centrifuging sedimentation.
Active Encapsulation in Biocompatible Nanocapsules

Baiheng Wu,Chenjing Yang,Bo Li,Leyun Feng,Mingtan Hai,Chun-Xia Zhao,Dong Chen,Kai Liu,David A. Weitz

DOI: https://doi.org/10.1002/smll.202002716

IF: 13.3

2020-01-01

Small

Abstract:Co-precipitation is generally refers to the co-precipitation of two solids and is widely used to prepare active-loaded nanoparticles. Here, it is demonstrated that liquid and solid can precipitate simultaneously to produce hierarchical core-shell nanocapsules that encapsulate an oil core in a polymer shell. During the co-precipitation process, the polymer preferentially deposits at the oil/water interface, wetting both the oil and water phases; the behavior is determined by the spreading coefficients and driven by the energy minimization. The technique is applicable to directly encapsulate various oil actives and avoid the use of toxic solvent or surfactant during the preparation process. The obtained core-shell nanocapsules harness the advantage of biocompatibility, precise control over the shell thickness, high loading capacity, high encapsulation efficiency, good dispersity in water, and improved stability against oxidation. The applications of the nanocapsules as delivery vehicles are demonstrated by the excellent performances of natural colorant and anti-cancer drug-loaded nanocapsules. The core-shell nanocapsules with a controlled hierarchical structure are, therefore, ideal carriers for practical applications in food, cosmetics, and drug delivery.
Ph-Responsive Dispersion and Electrostatic-Driven Self-Assembly of Poly(Acrylic Acid) Grafted Carbon Black

Wen-Bing Ding,Li Wang

DOI: https://doi.org/10.1080/00222348.2012.700225

2012-01-01

Abstract:The dispersion and self-assembly behavior of inorganic-polymer hybrid nanoparticles is a key point in the applications of these outstanding novel materials. In this work, the pH-responsive properties of core-shell nanoparticles of poly(acrylic acid) grafted carbon black (CB-g-PAA) dispersed in water were characterized by dynamic light scattering. The immobilized PAA chains were shown to control the level of CB-PAA nanoparticles dispersion in aqueous mixtures. The electrostatic-driven self-assembly of these hybrid particles, induced by cationic surfactant hexadecyltrimethylammonium bromide (CTAB) and star polyelectrolyte HPC-star-poly(2-(dimethy ethyl ammonium iodide) ethyl methacrylate) (HPC-star-poly(DMEAIEMA)), as the counter species was also characterized.
Preparation and Properties of Hydrophilic Carbon Black-Natural Rubber Nanocomposites

Shen-bo JIN,Yi-fan DU,Hui-hui LIU,Zhi-jie GU,Chi-fei WU

2015-01-01

Abstract:Poly(sodium-4-styrenesulfonate)(PSS)-decorated carbon black was prepared by one step in situ ball milling method.The resulting carbon black exhibited a superb stability in aqueous medium according to the results of particle size analysis and centrifugal sedimentation.Natural rubber(NR)filled with this kind of hydrophilic carbon black by employing a latex compounding technique was prepared.The composite was characterized and tested by mechanics performance testing,Scanning Electron Microscope(SEM),bound rubber content and Dynamic Mechanical Analysis(DMA).Owing to the homogeneous distribution of carbon black in matrix and the increase of the interaction between carbon black and NR molecular chain,an improvement in physical and mechanical properties was observed in the composites in comparison with the vulcanizate fabricated by traditional dry compounding.Futhermore,the extent of filler network was weakened according to the result of strain dependence of storage modulus and loss modulus tested by DMA.
Preparation of sodium alginate encapsulated anionic polyacrylamide microcapsules with delayed thickening performance

Huirong You,Xiancai Jiang,Zuming Jiang,Fuqing Yuan,Jian Hou,Bei Wei

DOI: https://doi.org/10.1080/10601325.2024.2311255

2024-03-02

Journal of Macromolecular Science, Part A Pure and Applied Chemistry

Abstract:Polyacrylamide (PAM) is a polymer compound that is widely used in oil extraction, wastewater treatment, food processing and other fields. As a typical polymer flooding agent, PAM has received much attention in the field of oil extraction due to its unique of viscoelastic properties. However, polymer flooding faces several challenges in oil reservoirs, including high injection pressure, high shear loss and crossflow. In an effort to overcome this challenge, we designed a method of coating Ca 2+ cross-linked sodium alginate onto the core structure of polyacrylamide, providing shear resistance and sustained release performance for the polymer. The important role of the shell material was indirectly demonstrated by measuring its apparent viscosity using digital rotary viscometer. Moreover, the swelling behavior of microcapsules in water was observed using an optical microscope. The protective shell made the slow release of anionic PAM into water under stirring at 500 rpm, maintaining the viscosity of the fluid below 10 mPa·s within 2 h, and the viscosity increased from 1.8 mPa·s to 30 mPa·s after 35 h. In addition, this work revealed the importance of effective encapsulation by emulsification/external gelation method and a facile shell modification by the layer-by-layer self-assembly method.

Polymer-encapsulated Hydrophilic Carbon Black Nanoparticles

Polymer-encapsulated Hydrophilic Carbon Black Nanoparticles Free from Aggregation

Poly(vinyl Alcohol)‐encapsulated Hydrophilic Carbon Black Nanoparticles Free from Aggregation

Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

Heterocoagulation Behavior of Carbon Black with Surface Encapsulation Through Emulsion Polymerization

Encapsulation of Carboxyl Polymer on the Surface of Nanometer Calcium Carbonate

Preparation of Polymer–nanoparticle Composite Beads by a Nanoparticle-Stabilised Suspension Polymerisation

Preparation of Hybrid Polymer Nanocomposite Microparticles by a Nanoparticle Stabilised Dispersion Polymerisation

Fabrication of carbon black/crosslinked poly(vinyl pyrrolidone) core-shell nanoparticles stable in water

Fabrication of Amphiphilic Porous PDVB-PAA Janus Nanoparticles: Formation Mechanism, Simultaneous Loading and Regulated Release of Hydrophobic and Hydrophilic Cargos

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Synthesis of Polymeric Nanocapsules with a Crosslinked Shell Through Interfacial Miniemulsion Polymerization

Facile synthesis of nanocapsules and hollow nanoparticles consisting of fluorinated polymer shells by interfacial RAFT miniemulsion polymerization

Preparation of Hydrophilic Encapsulated Carbon Nanotubes with Polymer Brushes and Its Application in Composite Hydrogels.

Encapsulation of Nanometer Caco3 by Polymer Network

Encapsulation of Nanometer CaCO&lt;sub&gt;3&lt;/sub&gt; by Polymer Network

Encapsulation of Surface-Modified Carbon Blacks by Poly(sodium-P-styrenesulfonate) Via a Phase Separation Method

Active Encapsulation in Biocompatible Nanocapsules

Ph-Responsive Dispersion and Electrostatic-Driven Self-Assembly of Poly(Acrylic Acid) Grafted Carbon Black

Preparation and Properties of Hydrophilic Carbon Black-Natural Rubber Nanocomposites

Preparation of sodium alginate encapsulated anionic polyacrylamide microcapsules with delayed thickening performance

Encapsulation of Nanometer CaCO<sub>3</sub> by Polymer Network