Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The variable-speed scroll compressors can adapt to the various demands of heating and cooling capacity, and the rotational speeds significantly influence the rotor dynamic and bearings lubrication, which might cause performance and reliability issues. In this paper, numerical models for the rotor-bearing-frame system are developed by coupling the Reynolds equation, rotor dynamic equation, and the flexibility equation of the frame. The experimental apparatus is also established to directly measure the journal displacement response in the hermetic high-pressure shell of the compressor. The predicted journal center trajectories are compared with the experimental results and they show good agreement. Results show that the whirl radius decreases with the increase of rotational speed at the measuring point, while the opposite tendency can be observed at the bottom of the main bearing. Transient dynamic analysis of the rotor shows that the tilting and deformation of the rotor vary with respect to different rotational speeds. The displacement of the crank part could lead to the separating tendency between orbiting and fixed scrolls through the coupled orbiting bearing, especially at the lower rotational speed, due to the pull of main balance weight. The numerical results also reveal that the distribution of oil film pressure is dominated by the squeeze effect due to the relatively stable magnitude but the variable direction of loads on the shaft. The influence of the deformation of the cantilevered bearing frame on the oil film thickness is significant but the maximum deformation moves downward at the higher rotational speed.

Experimental Study on the Vibration Testing of Scroll Compressor

Scroll Compressor Vibration Testing and Structural Optimization

Research on Vibration and Noise Characteristics of Scroll Compressor with Condenser Blockage Fault Based on Signal Demodulation

Experimental Study on Influencing Factors of Axial Clearance for Scroll Compressor.

Study on Characteristics of the Vibration and Noise of High-Power Scroll Compressor

Vibration Analysis and Control of a Screw Compressor Outlet Piping System

Optimal Design and Study on Dynamic Balance of Scroll Compressor Transmission System

Numerical Simulation and Experimental Validation of the Vibration Modes for a Processing Reciprocating Compressor

Experimental Investigation of Non-synchronous Vibration and Its Mechanism Analysis by Using a Cantilever Beam-Like Compressor Cascade

Experimental Study on the Feasibility of Axial Clearance Measurement in Scroll Compressor Using Eddy Current Method

Experimental investigation on the vibration characteristics of the compressor in the outdoor unit of a household air conditioner

Durability of Domestic Scroll Compressor Systems

Mechanical analysis of key components and machine performance for the oil regeneration project compressor

Analysis and Control of Discharge Piping Vibration of a Screw Compressor Used in a Chemical Plant

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Experimental Investigations of the Effect of Different Diffuser Types on the Vibration and Noise Radiation for Centrifugal Compressors

Research on faults diagnosis of dynamic balance in scroll compressor based on CWT-MViTV2

Mechanical Analysis of Key Components and Machine Performance for the General Scroll Profiles Compressor

Research and Solution of Vibration Problem of an Air-cooled Heat Exchanger of Reciprocating Compressor

LabVIEW- based Compressor Vibration Measurement and Analysis

Torsional Vibration Characteristics Analysis and Vibration Suppression Research of Compressor Flexible Rotor System Considering Fit Clearance