Abstract:Under the erosion of seawater–ice two-phase flow, seawater in pipelines of polar ships can cause the pipeline failures that threaten the safety of navigations. The discrete phase model (DPM) and erosion wear model (EWM) were established by using the computational fluid dynamics (CFD) method for numerical analysis of the 90° elbow with relatively severe erosion. This paper explores the erosion effect of pipelines under different conditions and puts forward optimal measures for pipeline protection. Compared with the existing multiphase flow research, the novelty of this study is that vibration conditions are considered and parameters such as two-phase flow velocity, ice packing factor (IPF), ice particle diameter and ice particle rotation characteristics are combined with vibration conditions. Combined with the comprehensive analysis of erosion effects of static pipelines, a general law of seawater pipeline wear under vibration is obtained. The results show that pipeline wear under vibration is more serious than under static conditions. Under static conditions, the wear of the same section in the pipeline increases with the increases of two-phase flow velocity and IPF. However, under vibration conditions, when the velocity is less than 3 m/s, the wear of the pipeline has no significant change, while when the velocity is over 3 m/s, the wear rate increases significantly. The particle diameter has little effect on the wear of static pipes, but under the vibration condition, the pipe wear rate decreases with the increase of particle diameter, and it starts to stabilize when the diameter exceeds 0.3 mm. If the rotation characteristics of ice particles are taken into account, the wear rate along the pipeline is significantly higher than that without particle rotation.

Fluid Simulation for Erosion Destroy of Petrifaction Pipe and its Application in Structure Optimized

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

Failure analysis and prediction of pipes due to the interaction between multiphase flow and structure

Erosion-corrosion Failure of REAC Pipes under Multiphase Flow

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Numerical Studies on Filter of Piping in Broadly Graded Cohesionless Soils

Experimental Study on Submerged Sand Erosion through a Slot on a Defective Pipe

Analysis of Fluidized Zone in Transparent Soil under Jet Induced by Pipe Leakage

Automation of Numerical Simulation on One-way Fluid-structure Interaction of Fluid-filled Pipeline

Predicting Erosion-Corrosion Induced by the Interactions Between Multiphase Flow and Structure in Piping System

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

Simulation of Abrasion Characteristics of Polar Ship Seawater Pipelines under the Coupling of Ice Particles and Vibration

An algorithm combining sedimentation experiments for pipe erosion investigation

Erosion Analysis and Optimal Design of Sand Resistant Pipe Fittings

CFD Simulation and Erosion Prediction for the Flow Influence of Inserted Component of Pipes

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

CFD-DPM modelling of solid particle erosion on weld reinforcement height in liquid-solid high shear flows

A New Method for Predicting Erosion Damage of Suddenly Contracted Pipe Impacted by Particle Cluster via CFD-DEM

Simulation of Pipe Progression in A Levee Foundation with Coupled Seepage and Pipe Flow Domains

Experimental Study on Particle Erosion Failure of Abrupt Pipe Contraction in Hydraulic Fracturing

Consequences prediction and analysis of pipe explosion considering fluid-structure interaction