Abstract:In this research, an angular contact ball bearing with two‐half inner rings is used as a carrier. Considering the two‐phase flow characteristics of oil and air in the bearing, the flow characteristics of lubricating oil inside the bearing with under‐race lubrication are studied. Based on the volume of fluid (VOF) method and the standard k–ε turbulent flow model, the characteristics of oil and air two‐phase flow inside the ball bearing are analysed. The bearing internal pressure field distribution, streamline distribution, and other flow properties for the different radial working clearances, pocket clearances and guide clearances are determined. The distribution of the lubricating oil in key areas is observed. The oil phase volume fraction of the key lubrication areas, such as the cage pocket surface and the inner and outer ring surfaces is used to evaluate the influence of different structural parameters on the bearing lubrication performance. The lubrication influences of the inner and outer guides of the cage are evaluated, and the internal flow characteristics of the bearing are analysed with different guide clearances. The results show that with the radial working clearance range from 0.100 to 0.145 mm, the pressure in the working contact area of the bearing decreases 26%. The pocket clearance ranges from 0.48 to 0.28 mm, and the pressure in the working contact area of the bearing significant increases from 0.642 to 1.165 MPa. From this perspective, the larger the radial working clearance and pocket clearance are, the more favourable it is for bearing lubrication. For bearings with under‐ring lubrication, when the bearing adopts outer guidance, the distribution of lubricating oil in the key areas of the bearing is worse than that for internal guidance. However, the pressure in the working contact area of the bearing slightly increases from 0.642 to 0.759 MPa with the inner guide clearance increasing from 0.4 to 0.8 mm.

Influence of Nozzle Structure on the Two-phase Flow Characteristic in Oil-air Lubrication System for High-speed Rolling Bearing

Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication

Research on Flow Characteristics of Air-oil Two Phase Annular Flow for Oil-air Lubrication

Investigation on the Effect of Sealing Condition on the Internal Flow Pattern of High-Speed Ball Bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Numerical Investigation of Two-Phase Flow for the Oil-Air Lubrication Inside an Angular Contact Ball Bearing

Analysis of Oil-Air Two-Phase Flow Characteristics inside a Ball Bearing with Under-Race Lubrication

Effects of oil-air lubrication methods on the internal fluid flow and heat dissipation of high-speed ball bearings

Research on internal two‐phase flow in the local micro‐clearance design of a high‐speed ball bearing with under‐race lubrication

Characteristic Flow Parameters of Oil/Air Lubricants in Bearing Chamber Under Different Flow Patterns

Analysis of oil shedding and ligaments formation on bearing rotary elements

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Air Flow Patterns and Noise Analysis Inside High Speed Angular Contact Ball Bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Flow Performance Analysis of Different Air Supply Methods for High Speed and Low Friction Ball Bearing

Application Status and Study of Oil-air Lubrication System for High Speed Rolling Bearing

Structural optimization of lubrication device for high speed angular contact ball bearing based on internal fluid flow analysis

Analysis of Air–Oil Flow and Heat Transfer inside a Grooved Rotating-Disk System

Lubrication performance analysis of sealing structures in rodless open cylinders

Numerical Investigation for Characteristics and Oil–air Distributions of Oil Film in a Tilting-Pad Journal Bearing

Investigation on Internal Air Flow Pattern of Angular Contact Ball Bearing with Different Cage Guiding Approaches