Abstract:Under-race lubrication can increase the amount of lubricating oil entering a bearing and greatly improve lubrication and cooling effects. The oil-air two-phase flow characteristics inside a ball bearing with under-race lubrication play a key role in lubrication and cooling performance. The motions of ball bearing subassemblies are complicated. Ball spin affects the oil volume fraction. In this paper, the coupled level set volume of fluid (CLSVOF) method is used to track the oil-air two-phase flow inside the ball bearing with under-race lubrication. The influence of various factors on the oil volume fraction inside the ball bearing with under-race lubrication is investigated, particularly rotating speeds, inlet velocity and the size of oil supply apertures under the inner ring. The influence of the ball spinning is analyzed separately. The result demonstrates that, on account of the centrifugal force, lubricating oil is located more on the outer ring raceway at rotational speeds of 5000 r/min, 10,000 r/min, 15,000 r/min and 20,000 r/min. The oil volume fraction inside the bearing gradually increases at an oil inlet velocity of 5 m/s, 10 m/s and 15 m/s. The circumferential distribution of oil is also similar. As the diameter of the oil supply aperture increases from 1.5 mm to 2 mm, the oil volume fraction increases inside the ball bearing. However, the oil volume fraction slightly decreases from 2 mm to 2.5 mm of oil supply aperture diameter. Ball spin does not affect the circumferential distribution trend of the lubricating oil, but slightly reduces the oil volume fraction. Furthermore, ball spin causes the surface fluid to rotate around its rotation axis and increases the speed.

Application Status and Study of Oil-air Lubrication System for High Speed Rolling Bearing

A Comparative Study on Simulation and Experiment of Oil-Air Lubrication Unit for High Speed Bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Summary of Oil-air Lubrication System Development

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication

Effects of oil-air lubrication methods on the internal fluid flow and heat dissipation of high-speed ball bearings

Influence of Nozzle Structure on the Two-phase Flow Characteristic in Oil-air Lubrication System for High-speed Rolling Bearing

Study on Design Technology of Oil-film Bearing in Rolling Mill

Research on Lubrication Efficiency Enhancement of High-speed Bearing under Oil-starvation Conditions

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Lubrication and stability analysis of nonlinear rotor-bearing system

Numerical Investigation of Two-Phase Flow for the Oil-Air Lubrication Inside an Angular Contact Ball Bearing

Flow Performance Analysis of Different Air Supply Methods for High Speed and Low Friction Ball Bearing

Design and application on experimental platform for high-speed bearing with grease lubrication

Experimental research on solid-lubrication journal bearing of unlubricated compressor

Analysis of Oil-Air Two-Phase Flow Characteristics inside a Ball Bearing with Under-Race Lubrication

The Tribological Properties of Nano-Lubricants and Their Application on Bearings: Recent Research Progress

Structural optimization of lubrication device for high speed angular contact ball bearing based on internal fluid flow analysis

Design and Experiment of Oil Lubricated Five-Leaf Foil Bearing Test-Bed

Main Failure Mode of Oil-Air Lubricated Rolling Bearing Installed in High Speed Machining