Experimental Study on Measuring the Stress of Coal Based on the Speed of Drilling Rod and the Amount of Drilling Chip

Lixin YUE,Quanchun YANG,Zhiyong HAO

DOI: https://doi.org/10.13952/j.cnki.jofmdr.2018.0162

2018-01-01

Abstract:Through the field, the rotation speed of the drill pipe and drill pipe cutting force, cutting torque stress theory analysis of drilling process of coal rock mass, the rotation speed of the drill pipe and drill cuttings coal comprehensive prediction feasibility of force, and multi parameter test equipment for laboratory test and field experiment using self-developed drilling drilling. The results show that: in the drilling speed, drilling parameters under the same speed and coal drill pipe stress was negatively correlated, drilling quantity and coal stress was positively related to the trend, and the rotation speed of the drill pipe and drill cuttings to maintain good relationship and confirmed according to the rotation speed of the drill pipe and drill cuttings to comprehensive the prediction of coal body force, concentrated degree is feasible; on the basis of field test data can be obtained in a mine practical work pressure relief zone, stress concentration zone and initial stress zone of the distribution position, and the stress concentration area minimum rotation speed of the drill pipe is about 517.2 r/min, corresponding to the maximum amount of drilling for 5.1 kg/m. Based on a large number of test data of drilling cuttings, it is proposed to predict and predict rock burst by using one hole and two indicators, so as to provide new ideas for prevention and control of coal mine dynamic disasters.