Experimental and numerical evaluation for drum dynamic reliability under extremely complex working conditions

Guochao Zhao,Xin Jin,Lijuan Zhao,Wenchao Zhou,Xuejing Liu
DOI: https://doi.org/10.1038/s41598-024-51266-6
IF: 4.6
2024-01-06
Scientific Reports
Abstract:Coal mining machine drums are prone to damage and malfunction under extremely complex working conditions, which seriously affects the efficiency and safety of coal production. In this paper, based on the theory of coal rock cutting and virtual simulation technology, finite element models of drum cutting coal rock were established and then verified by physical experiments. Through simulation analysis, the dynamic reliability of the drum was studied from three aspects: load, stress and wear, and a mathematical model of drum load was established with respect to the traction speed and drum rotation speed; based on the orthogonal test, the optimal working parameters to improve the wear resistance of the drum were derived. The results of the study found that when the traction speed increases, the load on the drum increases, and when the drum rotation speed increases, the load on the drum decreases; when the traction speed is increased from 2 to 6 m/min, the stress on the pick body under different rotation speeds increases to different degrees, with an average increase rate of 27.394%; when the drum rotation speed is 90 r/min, the traction speed is 3 m/min, and the coal loading mode is projectile loading, the wear depth of the picks and spiral blades is relatively small. The research method and results of this paper can provide a reference for the selection of the drum working parameters.
multidisciplinary sciences
What problem does this paper attempt to address?
The paper aims to address the dynamic reliability issues of the shearer drum under extremely complex working conditions during coal mining. Specifically, the paper focuses on the following aspects: 1. **Problem Background**: Under extremely complex working conditions, the shearer drum is prone to damage and failure, severely affecting the efficiency and safety of coal production. 2. **Research Methods**: - Based on coal-rock cutting theory and virtual simulation technology, a finite element model of the drum cutting coal-rock was established, and the accuracy of the model was verified through physical experiments. - The dynamic reliability of the drum was studied from three aspects: load, stress, and wear. - A mathematical model was established between the drum load and the traction speed and drum rotation speed. - Through orthogonal experiments, the optimal working parameters for improving the wear resistance of the drum were found. 3. **Main Findings**: - When the traction speed increases, the load on the drum increases; when the drum rotation speed increases, the load on the drum decreases. - When the traction speed increases from 2 meters/minute to 6 meters/minute, the stress on the cutting head body increases by an average of 27.394% at different rotation speeds. - When the drum rotation speed is 90 revolutions/minute, the traction speed is 3 meters/minute, and the coal loading mode is projectile loading, the wear depth of the cutting head and spiral blade is relatively small. 4. **Research Significance**: The research methods and results can provide a reference for selecting the working parameters of the drum, thereby improving the reliability and performance of the drum.