Abstract:Abstract. Dismantling of reactor pressure vessels and their built-in components is an enormous challenge in the deconstruction of a nuclear power plant. Due to the years of exposure to neutron radiation, the activated components can only be dismantled and packaged remotely. For reasons of radiation protection, preference is given to techniques that can be used underwater due to the shielding effect. A cutting method that meets these requirements is the waterjet abrasive suspension cutting technique (WAS). The cutting tool is capable of slicing metallic internals and other materials using a pure jet of water mixed with an abrasive substance at high velocity and pressure. The process offers numerous technical advantages, but it has a major disadvantage in producing secondary waste. Due to the addition of the abrasive substance, the WAS process produces a waste mixture of inactive abrasive particles and radioactive steel particles (activated by neutron radiation) during the dismantling of steel components in nuclear facilities. Since the steel particles are radioactive when the reactor pressure vessel (RPV) and its internals are dismantled, this particle mixture currently has to be disposed of as radioactive waste. This leads to a doubling of the radioactive waste. Despite the technical advantages, the WAS process used for cutting purposes is a severely disadvantage from an economic point of view, considering the significant disposal costs of the radioactive waste. The research project NaMaSK (wet sieving and magnetic separation of grain mixtures to minimise secondary waste in the dismantling of nuclear facilities), funded by the German Federal Ministry of Education and Research (BMBF), aims to separate the two fractions (abrasive and steel particles) with the help of magnetic separation and wet sieving. For this purpose, a prototype separation system MaSK (magnetic separation of grain mixtures to minimise secondary waste in the dismantling of nuclear facilities) with a magnetic filter and sieve has already been built and tested, and it can separate up to 98 % of the steel particles from the mixture. The separation process aimed to reduce the total amount of secondary waste by reusing abrasive particles for further WAS cutting. In the new test plant NaMaSK, the mode of operation will be converted from a batch process to continuous operation to highlight the economic aspect of the separation process. In this regard, an efficient design of the sieve structure and magnetic filter, followed by process optimisation, will be implemented. These new developments and the first results will be presented at the conference.

Development of an Automatic Cutting Device for Sealed Container of Radioactive Wastes

Application of Plasma Arc Cutting Technology in Dismantling of Large Metal Components in Containment Building

The Design of Pipe Cutting Tools for Remote Handling in Maintenance Manipulator for Tokamak.

Development of an Automatic Weighing and Distributing Equipment for Radioactive Isotopes

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Study on Automatic Control System of Sealing Machine for Metallic Fuel Tank

Design and Development of a New Automated and High Speed Cap Sealing System

Innovative Design of Replacement Device for Vulnerable Parts in the Nuclear Radiation Environment

Wet sieving and magnetic separation for the treatment of radioactive secondary waste produced from waterjet abrasive suspension cutting

Development Of A Test System For High Level Liquid Waste Partitioning

Design and Analysis of Control Rod Drive Mechanism Lower Canopy Welding Plugging Assembly

Design and Test of the Cutter-devices Hydraulic System of the Shield Tunneling Machine Based on System Recomposed Technology

Research on Design of the Automatic Steel Wire-Changing Cutting Device

Development of New-type Connection Assembly in The Reactor Containment

Intelligent Radioactive Waste Process Cloud-Based System for Nuclear Power Plant Decommissioning

Development of Mechanical Seal for Containment Spray Pump of PWR Nuclear Power Plant

A review of pipe cutting, welding, and NDE technologies for use in fusion devices

All position pipe welding device for remote welding

Design and development of multirobot system for remote repair of nuclear pipe equipment

Multi-Load Topology Optimization Design for the Structural Safety Maintenance of Low- and Intermediate-Level Radioactive Waste Packaging Containers in the Case of a Collision

Analyses of Automatization Welding Technology of Transver and Girth Seam in Al_2O_3 Container Body