Abstract:Lubricating oil is often employed in a twin-screw refrigeration compressor for lubricating bearings, sealing leakage paths, cooling refrigerant gas and regulating capacity. In this paper, the effect of lubricating oil on the performance of a semi-hermetic twin-screw refrigeration compressor is investigated. A mathematical model is established and a comprehensive experimental investigation is performed for this purpose. The model is validated using experimental data and then used to investigate the effect on compressor performance of lubricating oil supplied to the suction and discharge end bearings, and returned to the suction pipe. The results show that the compressor performance is reduced as the compensation oil injection flow rate increases in the suction pipe. However, as the compensation oil injection position moves from the suction pipe to a proper compression chamber position, the compressor efficiencies increase as the oil flow rate increases. The results also show that the compressor performance decreases as the oil flow rate increases at the suction end bearing. But the effect on the compressor performance of the lubricating oil supplied to the discharge end bearing depends on the oil temperature. Low temperature oil supplied to the discharge end bearing increases the compressor performance, while high temperature oil lowers the compressor performance. These analyses provide useful information for optimizing lubricating oil distribution to maximize energy efficiency in semi-hermetic twin screw refrigeration compressors.

Experimental Study on Influence of Oil Injection on Performance of Screw Compressor with Variable Speed

Experimental Investigation into the Effect of Oil Injection on the Performance of a Variable Speed Twin-Screw Compressor

Experimental Study on the Influencing Factors of Thermal Performance of an Oil-injected Single Screw Compressor

Energy-saving Technology and Experimental Research of Reciprocating Compressor

Experimental Study of the Oil Injection Screw Air Compressor

Experimental Study on the Performance Characteristics of Air Screw Compressor under Unloading Condition

Simulation of High Speed Oil-free Twin-screw Compressor in Fuel Cell

Experimental Study on the Indicating Diagram of an Oil-Injected Twin Screw Compressor

Study of Oil-Injected Screw Compressors and Its Application

Investigation on the characteristics of oil supply system for a hermetic variable speed rotary compressor

Experimental Study of Lubricating Oil Impact on Pressure Pulsation for Twin-Screw Refrigeration Compressor

Research on Performance of Scroll Compressor and System under Suction Injection

Research on Injected Effect and Heat-Transfer Characteristics of Narrow-Slit Injection Orifice Used for the Screw Compressor.

Experimental Investigation of the Water–injected Process-Gas Screw Compressor

Research on the Injected Effect by the Narrow-Slit Injection Orifice in Screw Compressors

Effects of Lubricating Oil on the Performance of a Semi-Hermetic Twin Screw Refrigeration Compressor

Refreshed Internal Working Characteristics of the Single Screw Compressor Based on Experimental Investigation

Performance Study of Water-Injection Scroll Air Compressor

Study on the friction characteristics of a self-lubricating linear compressor using vapor injection{fr}Étude des caractéristiques de frottement d'un compresseur linéaire auto-lubrifié utilisant l'injection de vapeur.

Experimental Study of Heat Transfer Effect on Oil-Free Scroll Air Compressor

Experimental Investigation on Twin Screw Refrigeration Compressor with Different Capacity Control Methods