Abstract:In order to improve the energy output consistency of 3, 3′-diamino-4, 4′-azoxyfurazan (DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber (F2604), nitrocellulose (NC) and NC/glycidyl azide polymer (GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope (SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric (TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

Preparation Improvement of Superfine A5 Booster Explosive

Preparation and Characterization of Ultra-fine A5 Booster

Preparation of Ultra-fine Booster Explosive Based on HMX by Supercritical Anti-solvent Technique

Process and Performance of DAAF Microspheres Prepared by Continuous Integration from Synthesis to Spherical Coating Based on Microfluidic System

Preparation Technology of Sub-micron HMX/FPM2602 Ultra-fine Composite Explosive

Technology of Ultra-fine RDX Coating with Rapid Expansion of Supercritical Solution Method

Preparation and Characterization of Ultra-fine HMX Based Booster by Supercritical SAS Method

Microfluidic preparation of surfactant-free ultrafine DAAF with tunable particle size for insensitive initiator explosives

Preparation and characterization of RDX/lead stearate composite particles

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Preparation,Characterization and Performances of High Purity Sub-micron RDX

Study on Preparation Process of Ε-Hniw Booster Explosive by Water Slurry Method

Preparation of Nano-DAAF Explosive with Improved Initiation Sensitivity

Preparation of spherical DAOAF with micro-nano structure by emulsion method: To improve short-pulse initiation performance

Preparation and performances of DAP-4@FOX-7 energetic composites

Influence of Surface Coating of RDX Fillers on Mechanical Sensitivity and Properties of CMDB Propellant

Preparation of Core-Shell Composite Materials Containing Ultra-Fine AP

Ultrafine RDX / Al Preparation and Properties of Mixed Explosives

Preparation of Ultrafine CL‐20 by Wet Grinding Method and the Study on Its Properties

Preparation and Characterization of Spherical Submicron CL-20 by Siphon Spray Refinement

Preparation and impact sensitivity of ultrafine RDX/Ni mixed explosives