Abstract:In order to improve the energy output consistency of 3, 3′-diamino-4, 4′-azoxyfurazan (DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber (F2604), nitrocellulose (NC) and NC/glycidyl azide polymer (GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope (SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric (TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

Preparation of Ultra-fine Booster Explosive Based on HMX by Supercritical Anti-solvent Technique

Preparation and Characterization of Ultra-fine HMX Based Booster by Supercritical SAS Method

Preparation Technology of Sub-micron HMX/FPM2602 Ultra-fine Composite Explosive

Preparation Improvement of Superfine A5 Booster Explosive

Study of Technology on the Preparation of Ultrafine Particle of Explosive Using the Technology of High-speed Impinging Streams

Factors Influencing on the Preparation of Ultrafine Energetic Core-shell Composite Materials

Preparation of Ultra-Fine Explosive HMX and RDX Using High-Speed Impinging Streams

Study on Preparation Process of Ε-Hniw Booster Explosive by Water Slurry Method

Preparation of Core-Shell Composite Materials Containing Ultra-Fine AP

High-quality and Homogeneous HMX-based Aluminized Explosives Using Droplet Microfluidic Technology

Technology of Ultra-fine RDX Coating with Rapid Expansion of Supercritical Solution Method

Preparation,Characterization and Performances of High Purity Sub-micron RDX

Preparation and Characterization of Ultra-fine A5 Booster

Preparation of HMX/TATB spherical composite explosive by droplet microfluidic technology

Study on Preparation and Performance Test of the Flexible Explosive with Higher Energy, Lower Sensitivity

Process and Performance of DAAF Microspheres Prepared by Continuous Integration from Synthesis to Spherical Coating Based on Microfluidic System

Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

Preparation and Thermal Stability of Nano-Sized HMX-Based Polymer Bonded Explosives

Preparation and Molecular Dynamic Simulation of Superfine CL-20/TNT Cocrystal Based on the Opposite Spray Method

Preparation and molecular dynamics simulation of spherical β-HMX by spray drying technology

Preparation of Ultrafine CL‐20 by Wet Grinding Method and the Study on Its Properties