Abstract:In order to study the static compression mechanical properties and damage characteristics of the JH-14C booster explosive, quasi-static compressive experiments were performed on a testing machine equipped with an environmental chamber (INSTRON). According to the GJB 770B–2005 powder test method, dimensions of the cylindrical specimen were set as \begin{document}$\varnothing $\end{document}12.5 mm×12.5 mm in the static compressive experiments. During compression, only one extensometer was used. All experiments were performed at a crosshead speed of 0.012 5, 0.062 5, 0.125, 0.625 and 1.25 mm/s at room temperature (25 °C), which led to a nominal strain rate of 0.001, 0.005, 0.01, 0.05 and 0.1 s−1, respectively. The average stress-strain values and standard deviations were calculated using five replicable experiments for each condition. The experimental results were compared with X0242 and PBX-9501, and the mechanical properties of JH-14C were analyzed. According to the mechanical properties of JH-14C at low strain rates, the original Ramberg-Osgood constitutive relationship was modified, and a nonlinear constitutive model including the strain rate term was established to describe the mechanical behavior of JH-14C at low strain rates. The micro morphologies of the recovered samples was observed by a scanning electron microscope (SEM) and compared with that of PBX-9501. The damage mode was analyzed to characterize the damage characteristics of JH-14C under quasi-static compression. The results show that the compressive strength of JH-14C increases with the increase of strain rate. The validity of the constitutive model was verified by comparing the experimental and calculated results. In the quasi-static compression experiments, the energetic particles and the binder were debonded. With the increase of the pressure, the original crack and the micro-crack formed by debonding on the energetic particles were converged and coalesced to form a macro crack, which led to the rupture and failure of the explosive.

Preparation and Characterization of Ultra-fine HMX Based Booster by Supercritical SAS Method

Preparation of Ultra-fine Booster Explosive Based on HMX by Supercritical Anti-solvent Technique

Preparation and Characterization of Ultra-fine A5 Booster

Preparation Technology of Sub-micron HMX/FPM2602 Ultra-fine Composite Explosive

Preparation of Core-Shell Composite Materials Containing Ultra-Fine AP

Microstructure and Performance of Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) Crystal Clusters Obtained by the Solvation-Desolvation Process

Preparation Improvement of Superfine A5 Booster Explosive

Factors Influencing on the Preparation of Ultrafine Energetic Core-shell Composite Materials

Preparation,Thermal Performance Analysis and Sensitivities Study of Nano HMX

Technology of Ultra-fine RDX Coating with Rapid Expansion of Supercritical Solution Method

Preparation and characterization of a series of high-energy and low-sensitivity composites with different desensitizers

Study on Preparation Process of Ε-Hniw Booster Explosive by Water Slurry Method

Preparation of the core-shell HMX@CS microparticles by biological excitation: Excellent hydrophobic-oleophilic properties and decreased impact sensitivity effectively

High-quality and Homogeneous HMX-based Aluminized Explosives Using Droplet Microfluidic Technology

Preparation and Properties of HMX Coated with a Composite of TNT/Energetic Material

Preparation and molecular dynamics simulation of spherical β-HMX by spray drying technology

Crystal Quality and Properties of Spherical HMX

Preparation,Characterization and Performances of High Purity Sub-micron RDX

Study on mechanical properties and damage characteristics of booster explosives under static compression

Preparation of Ultra-Fine Explosive HMX and RDX Using High-Speed Impinging Streams

Study of Technology on the Preparation of Ultrafine Particle of Explosive Using the Technology of High-speed Impinging Streams