Abstract:The insulation condition is the key to determining whether gas insulated switchgears (GISs) can operate stably and reliably. Partial discharge (PD) detection is an important technique for condition monitoring and evaluation in GIS. Acoustic emission (AE) method is commonly used in on-site PD detection. However, in field applications, there are often problems such as low signal-to-noise ratio (SNR) of measured ultrasonic signals and difficulty in extracting PD pulses. To solve this problem, a denoising method for GIS ultrasonic signals based on the combination of ultrasonic and ultra-high frequency (UHF) signals is proposed in this paper. Based on the difference in correlation between noise and PD signals, the noise in measured signal can be suppressed through accumulating and averaging of multiple ultrasonic signals, and the SNR of PD signal can be significantly improved. An actual 500-kV GIS experiment platform is established, and PD measurements for different types of defects are conducted. Then, a comparative study is conducted on the denoising performance of the proposed method and traditional denoising methods such as wavelet method and singular value decomposition (SVD) method. The results indicate that compared to traditional methods, the method proposed in this paper has a higher reduction in noise level. Especially for extremely low-SNR signals (PD pulses buried in noise), traditional methods have poor performance, while the proposed method can still extract the PD pulse form the noise. Furthermore, based on the denoised ultrasonic signals, the defect localization analysis is conducted to demonstrates the correctness of the denoising results. Finally, the proposed method is applied to on-site PD detection, which further evaluates the effectiveness of the denoising method.

Extracting Partial Discharge Signals Using AGR

Extracting partial discharge signals from colored noises using chirplet transform

Application of AGR on Phase Identification for Transmission Line Short Circuit Fault

Application of Neural Network Based on Adaptive Gaussian Representation in Discrimination of Fault and Oscillation in Power System

Discrimination of Three or More Partial Discharge Sources by Multi-Step Clustering of Cumulative Energy Features

A Novel Hybrid Approach for Partial Discharge Signal Detection Based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise and Approximate Entropy

Time-frequency Analysis of Partial Discharge Signal by Gabor Transform

Analysis and Rejection of Noises from Partial Discharge (PD) On-Site Testing Environment

Partial Discharge Pattern Recognition Based on an Ensembled Simple Convolutional Neural Network and a Quadratic Support Vector Machine

Affine projection algorithm-based exponential hyperbolic cosine for partial discharge denoising in substation

An Automatic Tool for Partial Discharge De-Noising via Short-Time Fourier Transform and Matrix Factorization

A Denoising Method for Partial Discharge Ultrasonic Signals in GIS Based on Ultra-High Frequency Signal Synchronization

Research on the Typical Partial Discharge Using the UHF Detection Method for GIS

Partial Discharge Patterns Recognition with Deep Convolutional Neural Networks

Identification of Partial Discharge Sources by Feature Extraction from a Signal Conditioning System

Comparison of Different Time-Frequency Analysis Methods for Sparse Representation of PD-induced UHF Signal

Time-Frequency Analysis on Pulse Current of Partial Discharge by Adaptive Spectrogram

Relationship Between Time-Frequency Representation of PD-induced UHF Signal and PD Current Pulse

An Adaptive Pulse Separation Strategy for PD Detection in Frequency-Tuned Resonant Tests

Analysis Of The Intrinsic Characteristics Of The Partial Discharge Induced By Typical Defects In Gis

Partial discharge location of power cables based on an improved single-terminal method