Abstract:To fabricate 10–16 Tesla high-field accelerator magnets, the high-Jc Nb3Sn superconductor is one of the most practical choices. However, it is a brittle material and is strain-sensitive. To reduce the potential Jc degradation of the conductor, it is crucial to accurately evaluate the stress of the coils owing to the large Lorentz force during magnet excitation. In the traditional stress analysis of magnets, the coils are usually regarded as homogenized structures using isotropic material coefficients; however, most superconducting (SC) coils have hierarchical and complicated structures. To obtain a more accurate estimation, it is necessary to consider the detailed internal structure of the coils during stress analysis. In this study, the homogenization method was applied to multi-scale stress analysis of a high-field accelerator SC magnet. The effective material coefficients of Nb3Sn coils were calculated using this method. Stress analysis of the magnet was performed using the effective material coefficients and isotropic material coefficients for comparison. Compared with the result obtained using isotropic material coefficients, the Von-Mises stress of the coil using effective material coefficients is larger at different load steps. The stress level of most Nb3Sn filaments in the strand was higher than that of the coil. The maximum stress of the Nb3Sn filaments appeared in the strand contact regions. In addition, there was a significant difference in the average stress of all materials in the strand. These findings will help develop more accurate analysis and simulation models for high-field SC magnets.

Analysis of Mechanical Stress and Magnetic Field in Nuclotron Dipole Magnet for GSI Accelerator

Structural analysis of CR superconducting dipole magnet in FAIR project

Mechanical Behavior of a 16-T FCC Dipole Magnet During a Quench

Structural analysis of superconducting dipole prototype for HIAF

Finite Element Analysis Method for Electromagnetic Stress of Axisymmetric High Field Superconducting Magnet

Mechanical stress analysis during a quench in CLIQ protected 16 T dipole magnets designed for the future circular collider

Study on internal strain distribution of the high-field Nb3Sn superconducting accelerator magnets with homogenization theory

Design of CR Superconducting Dipole Magnet in German FAIR Project

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

Stress Analysis of the Superconducting Magnet of LPT

Numerical analysis on the mechanical behavior of a 5T superconducting magnet

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Magnet in Self-Magnetic Field

3D Finite Element Analysis Method for Main Magnet Design of 100 MeV Compact Cyclotron

Numeric simulation of experiment in CR dipole magnet for GSI accelerator

Simulation of Thermo-Mechanical Stresses After a Quench in the 15 T Test Facility Dipole Magnet

Finite-Element Analysis of Pulsed High-Field Magnets with Precise Thermal and Structural Calculations

Structural Analysis of a 4-Layer Curved Alternating Gradient Canted-Cosine-Theta Magnet Applied for Light-Weight Gantry

Magnetic Design of Superconducting Magnets

Numerical Analysis of Mechanical Behavior for a 9.4-T Whole-Body MRI Magnet

Analysis and Design of the Induction Coil for a 2.1 M / 120 Mt Magnetic Field Qualification Test Facility

Stress Analysis of a 7 T Actively Shielded Superconducting Magnet for Animal MRI