Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Basic properties of fly ash from incineration of municipal solid waste

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Effect of the MgO/SiO 2 Ratio on MgO–silica Binders Solidifying MSWI Fly Ash

Mechanism of Na2O/CaO Ratio Affecting Ash Fusing Characteristics During Ash Deposition and Slagging in Municipal Solid Waste Incinerator

A STUDY ON BASIC CHARACTERISTICS OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR IN SHENZHEN

Analysis of pollution characteristics of fly ash from municipal solid waste incineration

Characteristics of the cement-solidified municipal solid waste incineration fly ash

Single column approach for the liquid chromatographic separation of polar and non-polar glucosinolates from broccoli sprouts and seeds.

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Study of Ashes from a Medical Waste Incinerator in China: Physical and Chemical Characteristics on Fly Ash, Ash Deposits and Bottom Ash

Characteristics of fly ash from waste-to-energy plants adopting grate-type or circulating fluidized bed incinerators: a comparative study

Analysis of composition characteristics and treatment techniques of municipal solid waste incineration fly ash in China

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Effect of silica fume on the mechanical property and hydration characteristic of alkali-activated municipal solid waste incinerator (MSWI) fly ash

On nonlocal monotone difference schemes for scalar conservation laws

Characteristics Investigation of the Solid Residues from CFB Municipal Solid Waste Incinerator

Study on characterization of ash from co-combustion of coal with municipal solid waste

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Kinetics and fusion characteristics of municipal solid waste incineration fly ash during thermal treatment