Abstract:Partial admission is applied wildly to regulate the power in turbomachinery. The prominent unsteady characteristic has a great effect on the aerodynamic performance and unit safety. The RNG k-ε turbulence model, dual time step method, sliding interface model and structural hexahedron mesh were adopted and the 3-D unsteady viscous model for the full annulus of the control stage of 300MW steam turbine with admission room and reinforced rib was constructed. The flow phenomena and exciting force were investigated detailed in multiple working conditions. The time-averaged unsteady wheel efficiency is over 3% lower than that from steady analysis with two different degrees of admission. The rotor blades experience large unsteady axial and tangential forces while passing the blocked channel. Spectrum analysis was performed and 50.0Hz is seen as the typical low frequencies. The largest amplitude of unsteady forces under the condition of three valves opened (ξ = 0.70) is at the first multiple rotational frequency due to the circumferential nonuniformities of flow domain, while the largest amplitude under the condition of two valves opened (ξ = 0.47) is at the second multiple rotational frequency due to the circumferential periodicities of flow domain. These provide essential parameters for strength and vibration analysis of blade. The pressure and static entropy plots show that the circumferential distributions are nonuniform and the nonuniformities decrease while moving towards the downstream sections in the two conditions. The entropy is significantly large, which means that the mixing and windage losses are huge resulting in the decrease of the blade power. The pressure drop moves towards the downsteam blade surface while rotor passing into the blocked channel. The pressure is recovering while rotor passing out the blocked channel.

Numerical Analysis of Vibration Under Partial Admission of Steam Turbine

Vibration Analysis of the Steam Turbine under Partial Admission

Research on Boundary Conditions of T Steam Turbine Blade by Finite Element Model Analysis

Natural Frequency and Dynamic Response of Rotor System of Steam Turbine Modelled with Euler-Bernoulli Beam

Analysis of the Vibration of Test-bed with Partial Admission Conditions

Numerical Simulation of Unsteady Flow Phenomena and Exciting Force in Control Stage of Steam Turbine under Multiple Working Conditions

A Seismic Analysis On Steam Turbine Considering Turbine And Foundation Interaction

Numerical simulation of the relationship between steam flow excitation characteristics and coverage on the governing stage of marine steam turbine

Effects of the steam excitation force to the vibration behaviours of the turbomachinery

Experiment Study on Steam Turbine Governing Stag about Shafting Vibration Instability under Partial Admission Mode

Numerical Analysis of the Dynamic Characteristics of Combined Labyrinth-Rotor Systems of Steam Turbines

Numerical Simulation and Experimental Study on Dynamic Characteristics of Gas Turbine Rotor System Subjected to Ship Hull Excitation

Numerical Simulation of Unsteady Flow Phenomena and Excitation Force in Control Stage of Steam Turbine

Numerical Simulation of Pressure Vibrations in a Francis Turbine Draft Tube with Air Admission

Numerical model for steamtight analysis of high pressure casing of turbine

Finite Element Dynamic Study on Large-Framed Foundation of Steam Turbine Generator

Rotor Dynamic Analysis On Partial Admission Control Stage In A Large Power Steam Turbine

Numerical Analysis for Vibration and Noise Due to Airflow of Main Steam Isolation Valve in Nuclear Power Station

Numerical Simulation on Flow Induced Vibration and Fretting Wear of a Steam Generator

Rotordynamic Stability under Partial Admission Conditions in A Large Power Steam Turbine

A Novel Nonlinear Model of Rotor/Bearing/Seal System and Numerical Analysis