Abstract:Fretting wear caused by flow-induced vibration (FIV) is a leading cause of fuel failure in light water nuclear reactors. This study describes a numerical methodology, validated with dedicated experiments, for predicting flow-induced vibrations in cantilever rods exposed to axial water flow, a paradigmatic configuration informative for fuel rods in water-cooled nuclear reactor cores. Utilising strong two-way fluid–structure interaction (FSI) simulations with an efficient computational approach, the study focuses on two key aspects of self-excited FIV: the dominant vibration frequency and the amplitude of the vibration. Correctly reproducing the former depends on optimising the solid domain and FSI coupling, while the latter hinges on the fluid solver's ability to accurately replicate unsteady flow behaviour, especially in areas of flow separation. Two unsteady Reynolds averaged Navier–Stokes turbulence models, both being high-Reynolds number versions, and several discretisation schemes for the convection transport are evaluated for their capacity to reproduce the correct unsteady flow behaviour. When the axial flow is directed from the free end to the fixed end of the rod, both the Eddy viscosity model k- SST and the Reynolds stress model by Launder, Reece, and Rodi reliably predicted the frequency and amplitude of vibrations for a Reynolds number range between 16.4k and 61.7k. When the flow direction is reversed, while vibration frequencies were accurately modelled, replicating precise unsteady flow behaviour proved more challenging. The study underscores the importance of properly resolving the flow in areas of flow separation to achieve accurate simulation of unsteady flow behaviour.

Numerical Simulation on Flow Induced Vibration and Fretting Wear of a Steam Generator

Numerical Simulation for Vibration of Interferometric Probein Wet Steam Flow Field

Numerical Simulation Of Fretting Wear Of Heat-Transfer Tubes In Steam Generator Under Random Excitation Forces

Development of three-dimensional simulation method for two-phase flow in square-pitch tube bundle in secondary side of steam generators based on porous drift-flux model

Thermal-Hydraulic Simulation of Localized Flow Characteristics in a Steam Generator

Numerical Analysis of the Flow Behavior in a Helically Coiled Once Through Steam Generator

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

S0803-1-3 Study on Evaluation of Gas Entrainment in Nuclear Reactor Vessel Using Numerical Simulation Method

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

CFD investigating the impacts of changing operating conditions on the thermal-hydraulic characteristics in a steam generator

Numerical Simulation of Fluid-Elastic Instability in Heat Exchanger Tube Bundles

An energy-based model for impact-sliding fretting wear between tubes and anti-vibration bars in steam generators

Analysis of Flow Excursion Instabilities in Helically Coiled Tube Steam Generator of High Temperature Gas-Cooled Reactor

Numerical Calculation on Flow Field of Diaphragm Seals and Steam-exciting in 600MW Steam Turbine

Application of URANS Simulation and Experimental Validation of Axial Flow-Induced Vibrations on a Blunt-End Cantilever Rod for Nuclear Applications

Three dimensional numerical simulation of sodium flow on small water leak in steam generator of fast reactor

Study on the Modeling and Simulation of the Horizontal Steam Generator in VVER-1000

Numerical Simulation of Flow-Induced Vibration of Three-Dimensional Elastic Heat Exchanger Tube Bundle Based on Fluid-Structure Coupling

Numerical Simulation and Validation of Flow-Induced Vibration of the Specific Rod under Elastic Supports using One-Way Fluid-Solid Interaction

Simulation Analysis of Fracture Process of Slag Deposits Surrounding Wall Tubes During Steam Sootblowing

Three Dimensional Numerical Simulation of Sodium Flowon Small Water Leak in Steam Generator of Fast Reactor