Abstract:<p>This study establishes a flow-induced nonlinear vibrations (FINV) model of tubing string using micro-finite element and energy methods along with the Hamilton variational principle. This model helps address the wear failure of tubing strings caused by FINV in high-pressure, high-temperature, and high-yield (3H) gas wells and considers the changes in wellbore trajectory, wellbore temperature/pressure, and contact/collision of the tubing-casing. To validate the proposed model, a simulation experiment of tubing string vibration was conducted. Based on the White-Fleisher wear theory, a method is proposed for calculating wear amount and depth of tubing string in 3H gas wells; the friction coefficient and wear rate are determined via a wear experiment. Thus, the influences of production rate, inclination angle, well section length, packer position, and centralizer position on the wear characteristics of tubing string are systematically analyzed. The results obtained demonstrate that, first, with the increase of production rate, the wear life of the tubing string decreases, and there exists a sudden value of production rate, which can be determined using the proposed analysis method, such that the field production allocation should be far away from the sudden production rate. Second, in the well trajectory design, the vertical section length should be small, while that of build-up section and the angle of stable inclined section should be large. Third, the optimal positions for the packer and centralizer in the field depend on the well structure, downhole tool size, etc. and can be determined using the proposed analysis method; these positions help design field tools. The research results provide a theoretically sound guidance for designing and practically sound approach for effectively improving the service life of tubing string in 3H gas wells.</p>

An energy-based model for impact-sliding fretting wear between tubes and anti-vibration bars in steam generators

Incorporating Dissipated Impact into Random Vibration Analyses Through the Modified Hertzian Contact Model

Numerical Simulation Of Fretting Wear Of Heat-Transfer Tubes In Steam Generator Under Random Excitation Forces

Numerical Simulation on Flow Induced Vibration and Fretting Wear of a Steam Generator

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact

The Effects of Load Conditions and Structural Parameters on Fretting Wear of Annular Flat in Heavy-Duty Gas Turbine

A Bi-Gaussian Acoustic Emission Model for Sliding Friction

A rolling contact fatigue health prediction model based on load interaction and damage energy accumulation

Finite element analysis of fretting wear considering variable coefficient of friction

Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts

An Efficient Numerical Model for Predicting the Torsional Fretting Wear Considering Real Rough Surface

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Dynamic changes of mechanical properties induced by friction in the Archard wear model

A Study on the Influence of Nonlinear Vibration on Fretting Damage of Involute Spline Pairs in Aero-Engines

Mechanism and Prediction Method of Fretting Damage in Involute Spline Couplings of Aero-engine

Modification methodology of fretting wear in involute spline

Experimental and Numerical Analysis on the Impact Wear Behavior of TP316H Steel

Friction-wear failure mechanism of tubing strings used in high-pressure, high-temperature and high-yield gas wells

Coupling fractal model for adhesive and three-body abrasive wear of AISI 1045 carbon steel spool valves

Reliability Analysis for the Dependent Competing Failure With Wear Model and its Application to the Turbine and Worm System

Numerical Analysis of the Impact Effect of Foreign Bodies on a Steam Strainer in a Steam Turbine Valve