Abstract:Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Ahead of Print. In order to figure out the influence of water film on the performance of the turbomachinery, understand the mechanism of the interaction between the high-speed airflow and the water film in turbomachinery, and provide a reference for the design of the subsequent experiments and hollow stationary blade water removal by heating. The commercial software FLUENT with the Eulerian Wall Films model is used to establish a solution method for simulating the flow of water film on the blade. The accuracy of the solution method is verified by comparing it with the results of the water film thickness experiment on the surface of the plate. The distribution of the water film on the outer surface of the vane as well as the influence of the water film on the mainstream field are numerically studied in the condition of the wet steam mainstream. The results show that the gradient of water film thickness on the pressure surface is relatively gentle and is along the radial direction. The gradient of water film thickness on the suction side is along the axial direction, and the value is larger; There is a V-shaped water film agglomeration area on the suction surface near the trailing edge where the water film thickness is greater than 45.7 μm; The top areas on both the suction side and pressure side produce a local water film agglomeration area with the dual effect of the secondary flow and the centrifugal force of the mainstream; The water film flow on the blade surface has little influence of the steam velocity and the speed of the mainstream. The increase of local pressure on the surface leads to an increase in the pressure of the adjacent mainstream areas.

THREE DIMENSIONAL VISCOUS FLOW NUMERICAL ANALYSIS OF STALL FLUTTER IN STEAM TURBINE BLADES

Numerical simulation of internal flow in forward-curved centrifugal fan

C207 applications of higher-order accurate computational fluid dynamic method to steam turbine blade designs

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Summary of Numerical Simulation of the Internal Flow in the Turbomachinery

Three Dimensional Numerical Analysis of Internal Flow Field of Axial Flow Turbine

A Practical Numerical Simulation Approach for 3D Wet Steam Flow

ANALYSIS ON FLOW SEPARATION CHARACTERISTICS OF LAST STAGE BLADE IN STEAM TURBINE UNDER SMALL VOLUME FLOW CONDITION

Numerical investigation of stalled flow in pump turbine under off-design condition

Numerical study on the three-dimensional flow of water film on the outer surface of the hollow stationary blade

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

Numerical Study of Unsteady Viscous Flow Past Oscillating Airfoil

Numerical Analysis of the 3-D Viscous Flow in the Passage of Axial Flow Hydraulic Turbine

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

A STAGE OF TEST TURBINE DESIGN AND ITS FLOW FIELD ANALYSIS

3-D Numeric Analysis on Flow Field in Submersible Centrifugal Pump with Cylindrical Blades

Advances in numerical analysis and design method of turbomachinery and applications in steam turbines part I: Advances in numerical analysis and design method

NUMERICAL SIMULATION OF THE AERODYNAMIC PERFORMANCE OF A SINGLE-STAGE TURBINE AT OFF-DESIGN WORKING CONDITIONS

3-D viscous numerical investigation on flow field of a transonic axial-flow fan rotor

Vorticity Dynamics Analysis On Flow In Francis Hydraulic Turbine

Structure and Modal Analysis of the Last Stage Blade in Steam Turbine under Low Volume Flow Conditions