Abstract:Gaseous 1,2-dichlorobenzene (1,2-DCBz) was catalytically decomposed in a fixed-bed catalytic reactor using composite copper-based titanium oxide (CuOx/TiO2) catalysts with different copper ratios. Carbon nanotubes (CNTs) were introduced to produce novel CuOx/TiO2-CNTs catalysts by the sol-gel method. The catalytic performances of CuOx/TiO2 and CuOx/TiO2-CNTs on 1,2-DCBz oxidative destruction under different temperatures (150-350 °C) were experimentally examined and the correlation between catalyst structure and catalytic activity was characterized and the role of oxygen in catalytic reaction was discussed. Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) generation during 1,2-DCBz catalytic oxidation by CuOx/TiO2-CNTs composite catalyst was also examined. Results indicate that the 1,2-DCBz destruction/removal efficiencies of CuOx (4 wt%)/TiO2 catalyst at 150 °C and 350 °C with a GHSV of 3400 h(-1) are 59% and 94% respectively and low-temperature (150 °C) catalytic activity of CuOx/TiO2 on 1,2-DCBz oxidation can be improved from 59 to 77% when CNTs are introduced. Furthermore, oxygen either in catalyst or from reaction atmosphere is indispensible in reaction. The former is offered to activate and oxidize the 1,2-DCBz adsorbed on catalyst, thus can be generally consumed during reaction and the oxygen content in catalyst is observed lost from 39.9 to 35.0 wt% after reacting under inert atmosphere; the latter may replenish the vacancy in catalyst created by the consumed oxygen thus extends the catalyst life and raises the destruction/removal efficiency. The introduction of CNTs also increases the Cu(2+)/Cu(+) ratio, chemisorbed oxygen concentration and surface lattice oxygen binding energy which are closely related with catalytic activity. PCDD/Fs is confirmed to be formed when 1,2-DCBz catalytically oxidized by CuOx/TiO2-CNTs composite catalyst with sufficient oxygen (21%), proper temperature (350 °C) and high concentration of 1,2-DCBz feed (120 ppm).

Catalytic Degradation of 1,2-Chlorobenzene and Dioxins Coupled by Kinds of Methods

Catalytic Ozonation of Multiple Vocs at Low Temperature over a Potassium-Modified Mnox-Based Catalyst

Low temperature chlorobenzene catalytic oxidation over MnOx/CNTs with the assistance of ozone

Catalytic Oxidation of 1,2-Dichlorobenzene on V2O5–WO3/TiO2 Films: Effects of Ozone Addition and UV Irradiation

Catalytic Decomposition of 1,2-Dichlorobenzene over V2O5/TiO2 Catalysts Blending with Typical Carbon Nanotubes

Ozone Assisted Oxidation of Gaseous PCDD/Fs over CNTs-containing Composite Catalysts at Low Temperature.

Catalytic Oxidation of 1,2-Dcbz over V2O5/TiO2-CNTs: Effect of CNT Diameter and Surface Functional Groups.

Catalytic Oxidation Of Chlorobenzene Over V2o5/Tio2-Cnts Nano Composites

Catalytic decomposition of gaseous 1,2-dichlorobenzene over CuOx/TiO₂ and CuOx/TiO₂-CNTs catalysts: Mechanism and PCDD/Fs formation.

Low Temperature Degradation of Polychlorinated Dibenzo-P-dioxins and Dibenzofurans over a VOx-CeOx/TiO2 Catalyst with Addition of Ozone.

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

Catalytic oxidation of PCDD/F on a V2O5-WO3/TiO2 catalyst: Effect of chlorinated benzenes and chlorinated phenols.

Catalytic Oxidation of PCDD/F on a V2O5-WO3/TiO2 Catalyst: Effect of Chlorinated Benzenes and Chlorinated Phenols

Ozone-Enhanced Oxidation of Pcdd/Fs over V2o5-Tio2-Based Catalyst

Catalytic Decomposition of Gaseous 1,2-Dichlorobenzene over CuOx/TiO2 and CuOx/TiO2-CNTs Catalysts: Mechanism and PCDD/Fs Formation

Study on the degradation of o-dichlorobenzene by DBD-NTP co-modified titanium gel catalyst

Catalytic Oxidation of 1,2-Dcbz over V<SUB Align="right">2o<sub Align="right">5/tio<sub Align="right">2-Cnts Catalysts: the Effect of Water

Catalytic Oxidation of Chlorobenzene over V2o5/Tio2-Carbon Nanotubes Composites

Catalytic Ozonation of Toluene and Dichloromethane Mixture at Low Temperatures over Modified MnOx-based Catalyst

PCDD/F removal at low temperatures over vanadium-based catalyst: insight into the superiority of mechanochemical method