Abstract:It is of great importance to acquire precisely the scaling-off location and the extent of slagging in the furnace to conduct combustion adjustment and avoid the dropping of bulk slag, An experimental platform where slag cooling is simulated was built, and the features of heat and mass transfer during the cooling process-of the slag were studied. The experimental results show that during the cooling process of the high-temperature slag, the closer the measuring point is to the drop point of the slag, the faster its temperature rises, by a large margin. Meanwhile, the average temperature of the-water in the upper layer shot up first and then decreased, while the temperature of the relatively deep water (>= 3 cm) tended to rise gradually. In addition, the temperature rise of the cooling water and the bursting water evaporation are in direct proportion to the mass of the slag and are in linear relation to the temperature of the slag About 20% of the slag heat is taken by bursting evaporation, and 80% is conducted to the cooling water. In a thermal powerplant's 440 t/h pulverized coal-fired boiler with, water-cooled slag removal, a temperature matrix with eight measuring points was arranged in the slag extractor. The location and mass of the slag in the furnace were determined, and the reason for slagging in,the furnace was analyzed, in order to make fine adjustments to the parameter of air supply, to improve the tangential circle deflection in the furnace further, and to avoid the dropping of bulk slag quenching the fire, which guarantees that the boiler can run safely and stably.

Cause Analysis and Prevention Measures on the Slagging in 600 MW "W"-Flame Boiler

Experimental Investigation of the Scaling-Off Location and the Slag Mass in Pulverized Coal-Fired Boiler with Water-Cooled Slag Removal

Harmfulness and Preventing Measures of Slagging in Heated Surfaces of Boiler

Cause analysis and solutions about slagging of 670 t/h boiler in Zhuozi Power Plant

Numerical Simulations of the Slagging Characteristics in Three Types of W-flame Boiler

Investigation on slagging and high-temperature corrosion prevention and control of a 1000 MW ultra supercritical double tangentially fired boiler

Cause Analysis and Solving Measures of Coke Formation by Burning Zhundong Coal in Power Plant

Slagging Analysis and Measures to Prevent Slagging in Utility Boiler

Research on Slagging and High Temperature Corrosion Prevention and Control of a 1 000 MW Ultra Supercritical Double Tangentially Fired Boiler

A MODEL FOR OVERALL SLAGGING DIAGNOSIS IN PULVERIZED-COAL FIRED BOILERS

Numerical Simulation Analysis of Slagging Trend of Large-scale Oxygen Fuel Combustion Boiler

Investigation of Slagging Characteristics on Middle and Low Temperature Heat Transfers by Burning High Sodium and Iron Coal

Experiment Research on Slagging of the Coal-fired Chain Grate Stoker Boiler

Research on Slagging and High Temperature Corrosion Prevention and Control of a 1000 MW Ultra Supercritical Double Tangentially Fired Boiler

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Test Study Upon Slagging on the Heating Surface of Pulverized Coal Boiler

An Effective Strategy for Monitoring Slagging Location and Severity on the Waterwall Surface in Operation Coal-Fired Boilers

Experimental Study on Slagging Characteristic of Low-volatile Coal Water Slurry in a 220t/h Boiler

Experimental Study on Slagging Monitoring of Pulverized Coal-Fired Boiler Based on Slagging Image

Reason analysis and treatment for desulfurization slurry poisoning during combustion of Majialiang coal

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler