Abstract:Utilizing low-rank coals in power plants takes a risk of slagging, especially when burning coals rich in alkali and alkaline earth metallic (AAEM) elements. To predict the slagging propensity of low-rank coals, this work develops a novel approach for accurately measuring the sticking probability of thermally stable slag samples based on the well-controlled flat-flame system. We collect deposit samples (PSD) severely accumulated on the platen superheater surface of a 660 MW boiler co-firing two low ranks (alkali-rich Phi-coal: iron-rich Ind-coal = 15.2 wt%: 84.8 wt%). It is found that the existing theoretical models can hardly reproduce the measured sticking probability at elevated temperatures. We thus propose an Sshaped nonlinear correlation of ash sticking probability with the melt fraction using two tuning parameters. The fully-sintered PSD slag is mainly composed of refractory anorthite (CaAl 2 Si 2 O 8 ) and hematite (Fe 2 O 3 ), which are largely determined by the dominant Ind-coal ash fed into the boiler. However, the excessive accumulation of PSD can only be attributed to the much stickier Phi-coal ash rich in lowmelting-point, dispersed Na-aluminosilicates. Combining the measured sticking probability and physicochemical properties of the slag and ash samples, we reveal a positive correlation of the ash sticking probability with the sodium content of the samples, almost regardless of the contents of alkaline earth metals and iron. It highlights the leading role alkali metals play in slagging. In contrast, iron exists as discrete hematite (Fe 2 O 3 ) in the slag and is less effective than AAEM in forming slags on the platen superheater. Our work provides a more reliable method and criterion for evaluating the slagging propensity of fully/partially-molten particles in solid fuel combustion. (c) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Harmfulness and Preventing Measures of Slagging in Heated Surfaces of Boiler

Experimental Investigation of the Scaling-Off Location and the Slag Mass in Pulverized Coal-Fired Boiler with Water-Cooled Slag Removal

Solution to the Problems of Fire-Carrying in Primary Air Jet Orifice in 125MW Units

Test Study Upon Slagging on the Heating Surface of Pulverized Coal Boiler

STUDY ON ELIMINATING FIRE-CARRYING IN PRIMARY AIR JET ORIFICE BY ADMIXING EXHAUST GAS

Burning and Clinkering Properties of Black Liquor Coal Water Slurry in 0.25MW Furnace

Investigation on slagging and high-temperature corrosion prevention and control of a 1000 MW ultra supercritical double tangentially fired boiler

An Effective Strategy for Monitoring Slagging Location and Severity on the Waterwall Surface in Operation Coal-Fired Boilers

Research Progress on Slagging Mechanism During High Alkali Coal Combustion Process

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Theoretical and In-situ Experimental Investigation on Reducing Slagging Damage for Swirl-opposed Fired PC Boiler with Non-designed Blending Coals

A MODEL FOR OVERALL SLAGGING DIAGNOSIS IN PULVERIZED-COAL FIRED BOILERS

Experimental Study on Slagging Monitoring of Pulverized Coal-Fired Boiler Based on Slagging Image

Slagging behavior and mechanism of high-sodium–chlorine coal combustion in a full-scale circulating fluidized bed boiler

Behavior of Slagging Deposits During Coal and Biomass Co-combustion in a 300 Kw Down-Fired Furnace

Slagging characteristics in the superheater area and K/Ca distribution of biomass-fired grate boiler

Overview on Forming Course and Mechanism of Ash Deposits in Coal Fired Boiler

Experimental Study on Slagging Characteristic of Low-volatile Coal Water Slurry in a 220t/h Boiler

Mechanistic Studies on the Slagging Propensity in Low-Rank Coal Combustion

Research on the Dynamic Characteristic of Ash Deposition in Boilers Burning Coal and Coal Water Slurry

Investigation of Ash Deposition Characteristics in Full-Scale Circulating Fluidized Bed Boiler Burning Zhundong Coal